Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Razor part
- Thread starter bobcat9095
- Start date
Overachiever
Active member
I don't, but I haven't been too impressed with WW's ability to solve their supply chain issues, been waiting around for a few things since the middle of July.
bobcat9095
Member
Yeah this doesn't have me shut down. But makes me worry about "back ordered" parts that might.
I gotta say the opposite. Had a major hot water leak for a few hours in the control room. Almost spraying on the control box for my WW HV. Called and spoke to Alex and he got me the parts needed and even got them Saturday. I even called him on Sunday for a few questions. When I replace it will be Washworld... period...
Eric H
Well-known member
I'm 90% sure I have one or more. I have to run to the wash and check. I'll PM my cell number to you now.
bobcat9095
Member
Eric H had the part I am looking for and has already shipped it to me. I really appreciate his help and super fast response.
Waxman
Super Moderator
it's great that Eric was able to help out with this part. But I can't help but think that this is not a Proprietary part.
New Washdog
Active member
I would reach out to these guys, as I believe they are the ones supplying the belts to WW.
theeNEcarwashjefe
New member
Can any one tell me how to get that collar off so I can change out gears? I took bolts out put them in the other holes n bolts broke off. Now I have to drill hole for east out. I can't get that collar off tho.
bobcat9095
Member
It may be seized on there. They will do that over time. Then you have to replace the shaft and all.
Eric H
Well-known member
I’ve had to hammer the cog gear inward towards the machine and then use a flat chisel to open up the slot in the bushing. I’ve even had to cut the bushing off with a grinder.
Whatever you do, don’t hammer on the end of the axle shaft! It will mushroom over and you’ll have to replace it.
I keep axles, bushings and cog gears in stock because I always seem to damage them no matter how gentle I try to be
Whatever you do, don’t hammer on the end of the axle shaft! It will mushroom over and you’ll have to replace it.
I keep axles, bushings and cog gears in stock because I always seem to damage them no matter how gentle I try to be
theeNEcarwashjefe
New member
Ty yeah it was a pain I couldn't remove a set screw and fought it the whole way thank gosh for gear pullers
