Rowe BC-1200 help

[slash007]

I have a BC-1200 that was giving me the error "left detector on too long". I checked and found quarters stuck in front of the laser. I removed the assembly and took the quarters out. Now I am getting the error "bucket not open" after resetting it. No matter what test switch I press, all 3 give me the bucket not open error. What is the most likely cause?
Thanks.

 

[6t7gto]

http://www.roweinternational.com/pdf/BC12001400RevL.pdf

page 115

 

[slash007]

Thanks for the link. I actually read that before posting and tried what it says, but didn't have any luck. I was hoping for some real world experience as someone with a similar issue in the past might be able to pinpoint it easier.

 

[slash007]

Just to update, I found one of the wires going into the harness was not seated properly. It was only going in half way. Works great now.

Thanks.