What's new

Rusty Tokens…

Etowah

sjb

Active member
Joined
Jul 7, 2011
Messages
169
Reaction score
174
Points
43
Location
Atlanta GA
Hi… we made the conversion to only dispensing our $1 tokens at the wash a year ago and have been pleased with the change…

However, we have a percentage that have gotten rusty and ugly looking and I don’t want to put them back in circulation until I clean them…

They are CT-123 from Van Buren, bi-metal nickel plated steel.

Any suggestions on the best cleaning methods and solutions for these tokens…? does the tumbler that Kleen-rite sells work well…?

thanks much!
sjb
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,948
Points
113
Location
Texas
Someone on here said they clean their brass tokens with a Harbor Freight vibrating parts cleaner. I don't know how well that will work on rusty steel tokens.
 
  • Like
Reactions: sjb

sjb

Active member
Joined
Jul 7, 2011
Messages
169
Reaction score
174
Points
43
Location
Atlanta GA

Kimberly Berg

Well-known member
Joined
Jul 25, 2013
Messages
448
Reaction score
738
Points
93
Location
Citrus Heights CA
Your customers will appreciate your efforts for making your tokens bright & shiny again! I use $1 tokens from Van Brooks (CT-121). We've been using them since 2015 and have purchased over 145,000. I have researched and used a lot of cleaning products & think I have found the best combination. I'm happy to share! Avoid vinegar as this will cause micro-pitting that will attract more dirt. While the tokens may look like they're rusting, they are rust-resistant, but will tarnish. The exact metal properties is proprietary, but Van Brooks told me they're made of a "nickel-silver combination".
  • For light cleaning and polishing, put the tokens in a tumbler, with Flitz Polish (Polish works BETTER than Flitz Tumbler/Media Additive), with 2/3 cup of corn media and 1/3 cup course walnut media. Tumble for 2 - 2.5 hours.
  • For heavier soaking and cleaning, soak tokens in SafeClean Nickel Coin Cleaner (liquid, ready-to-use). Use a small glass or plastic container and soak for 1-2 days.
  • Then, use Bar Keepers Friend (powder) and a stiff tooth brush and hand-scrub the dirtiest tokens. Rinse and dry.
  • Then, put them in a tumbler, with Flitz Polish and corn/walnut media.
  • The tokens come out with a BRILLIANT SHINE – LIKE NEW AGAIN!!
PURCHASING INFORMATION:

BAR KEEPERS FRIEND (POWDER)

Purchase from any home improvement store (ie. Ace Hardware, Home Depot, Lowe’s

CORN MEDIA (Mix with 1/3 Walnut Media)
Purchase from FrankfordArsenal.com

FLITZ POLISH
Purchase from Amazon.com

NICKEL COIN CLEANER
Purchase from Wonder Oil Products
264 Ridge Crest Drive
Seguin, TX 78155
1-707-252-7555
Toll Free 1-866-695-8994
www.wonderoil.com

TUMBLER
Cabela’s Model 400 Vibratory Case Tumbler Kit
www.cabelas.com
1-800-237-4444

WALNUT MEDIA (COURSE GRAIN)
Purchase from local Harbor Freight store
 

Attachments

sjb

Active member
Joined
Jul 7, 2011
Messages
169
Reaction score
174
Points
43
Location
Atlanta GA
Your customers will appreciate your efforts for making your tokens bright & shiny again! I use $1 tokens from Van Brooks (CT-121). We've been using them since 2015 and have purchased over 145,000. I have researched and used a lot of cleaning products & think I have found the best combination. I'm happy to share! Avoid vinegar as this will cause micro-pitting that will attract more dirt. While the tokens may look like they're rusting, they are rust-resistant, but will tarnish. The exact metal properties is proprietary, but Van Brooks told me they're made of a "nickel-silver combination".
  • For light cleaning and polishing, put the tokens in a tumbler, with Flitz Polish (Polish works BETTER than Flitz Tumbler/Media Additive), with 2/3 cup of corn media and 1/3 cup course walnut media. Tumble for 2 - 2.5 hours.
  • For heavier soaking and cleaning, soak tokens in SafeClean Nickel Coin Cleaner (liquid, ready-to-use). Use a small glass or plastic container and soak for 1-2 days.
  • Then, use Bar Keepers Friend (powder) and a stiff tooth brush and hand-scrub the dirtiest tokens. Rinse and dry.
  • Then, put them in a tumbler, with Flitz Polish and corn/walnut media.
  • The tokens come out with a BRILLIANT SHINE – LIKE NEW AGAIN!!
PURCHASING INFORMATION:

BAR KEEPERS FRIEND (POWDER)

Purchase from any home improvement store (ie. Ace Hardware, Home Depot, Lowe’s

CORN MEDIA (Mix with 1/3 Walnut Media)
Purchase from FrankfordArsenal.com

FLITZ POLISH
Purchase from Amazon.com

NICKEL COIN CLEANER
Purchase from Wonder Oil Products
264 Ridge Crest Drive
Seguin, TX 78155
1-707-252-7555
Toll Free 1-866-695-8994
www.wonderoil.com

TUMBLER
Cabela’s Model 400 Vibratory Case Tumbler Kit
www.cabelas.com
1-800-237-4444

WALNUT MEDIA (COURSE GRAIN)
Purchase from local Harbor Freight store

Much thanks for sharing this info!
 

Roz

Well-known member
Joined
Oct 29, 2017
Messages
1,354
Reaction score
798
Points
113
Are you using the nickel plated steel tokens… plus a cleaning solution…?

thanks!
Nickel plated tokens, no cleaning solution as the tumbler uses a fine stone that comes with the system and is reused over and over. Cleans 90% to be like new but some 10% (the worst) only get modestly cleaner. Frankly not certain the customer cares if they are shiny, probably more for my benefit and sensibility.
 

sjb

Active member
Joined
Jul 7, 2011
Messages
169
Reaction score
174
Points
43
Location
Atlanta GA
fyi…. I bought the Klopp token cleaner and here is a picture of the results after running the machine for 12 + hours…

there were a couple dozen tokens still dirty and I thru them back for another run….

hope this helps!
 

Attachments

Keno

Well-known member
Joined
May 30, 2022
Messages
783
Reaction score
516
Points
93
Nice results, that klopp cleaner seems like a normal vibratory cleaner to me with a much higher price tag?
 
  • Like
Reactions: sjb
Top