Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Ryko Soft Gloss XS
- Thread starter washmeclean
- Start date
washmeclean
New member
Hi yes thanks was heading to the wash now to check them
washmeclean
New member
timmer settings worked great only have one issue im missing something cant pinpoint just yet but narrowing it down. i have on board dryers , and yes to onboard in setup questions and using y50-51 works fine but i get an 8Y 2-digit code if i answer no to on board dry will clear the code and - - found the same results as yes to wheel scrub option and the toggle switch enabled off 8Y so assuming i need to look for an input to the plc for an enable switch from onboard dryer
Ryko CS
Active member
A code 8Y doesn't actually exist, so not sure why/how you would be seeing that. Where are you seeing it, on the 2 digit display, or in the HPP? We don't have any alpha characters in a 2 digit code, so if it's on the 2 digit display, sounds more like a bad display. The only place to enable/disable OBD is in the setup questions and in how you are arming the machine.
Do you have a wiper prox input on, either X45 (R) or X46 (L)? That would cause the dryer cycle not to function. If both proxes are on, it would be a code 83. If you had either the wheel scrub or wiper disabled, that would tag a code 84. You need to have one of them on with the wiper to the outside for it to work.
Do you have a wiper prox input on, either X45 (R) or X46 (L)? That would cause the dryer cycle not to function. If both proxes are on, it would be a code 83. If you had either the wheel scrub or wiper disabled, that would tag a code 84. You need to have one of them on with the wiper to the outside for it to work.
washmeclean
New member
2-digit display is acting up so could be . will check wiper prox and if disabled
