What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Saving a few $$ with Zoro Tools

I've got a effluent pump that is old and going out. It is working intermittently right now. I bought a replacement dayton branded 1/2 HP sump pump, AND a Milwaukee fuel 12V 3/8" ratchet setup, another pair of knipex pliers, and a pelican single AAA light I like to keep in my pocket. Total price for all the goodies delivered with discount was 373.23

If I had walked into my local grainger and bought just the very same effluent pump by itself, it would have cost 423.00 with tax.
 
Last edited:
Use a backpack husqvarna backpack blower.

I been using the backpack blower for 10 years. A wise carwash owner told be about the billy goat and now I am hooked. Bought another billygoat with 30% coupon code. I have a lot of trees at my locations and it takes time to blow them to a pile and bag them. The billygoat save time, bags and is much cleanier. I also like to use the billy goat in the corners in the bays and around the vacs. It picks up all the sand and rock debris. So much of my life has been wasted.

That Milwaukee 12V 3/8 ratchet is my most use tool. It saves time in changing motors and taking off and putting on spray tips. No more scraping your knuckles when changing drive motor.
 
Last edited:
That Milwaukee 12V 3/8 ratchet is my most use tool. It saves time in changing motors and taking off and putting on spray tips. No more scraping your knuckles when changing drive motor.

I thought I would grab one and try it after you bragged on yours so much. I've got a big impact wrench but I could have used this little one when replacing the starter on my truck. I think it worked out to 120.00 with discount.
 
I thought I would grab one and try it after you bragged on yours so much. I've got a big impact wrench but I could have used this little one when replacing the starter on my truck. I think it worked out to 120.00 with discount.

For tools goto toolbarn
 
what about Thermal Efficient High Efficiency water heaters? Does Zoro have those? If so, any recommendations ? I like the idea of 2" outgoing hose...
 
vinh,

You mentioned tax-free. In our state of north dakota, being a business ... there are state tax department auditors ... who are on standby to audit & make sure you pay the equivalent plus as if sold in the state. The reason I say not just equivalent, but also "plus" is because the auditor in our case went back 7 years & charged us 12% compounded interest. I suppose we should be thankful we did not have an exorbitant "ignorance of the law" fine in addition ... but there are limits to our gratitude.

mike walsh http://kingkoin.com/USA_Deficit_Reduction.html

I am a bit surprised at this. In most states it is the vendor that must collect the tax. When I had my company they made me pay for uncollected sales taxes. I had the option of trying to collect from my customers but they did not try to collect from them.
 
Last edited:
No idea, but I imagine you could look on their web site and or call. I believe they are a division of Grainger...but I think they operate separate customer service.
 
does anyone know if they have the HE thermal eficiency water heaters?


They sell the Rheem-Rudd line. I have no idea if they are competitive.

next scheduled discount date I know of is May 19th, 2016- 25% off any order over $175 using code BLOSSOM

I just ordered some CREE canopy LED lighting from them. With discount it worked out to about $300 each and free shipping
 
They sell the Rheem-Rudd line. I have no idea if they are competitive.

next scheduled discount date I know of is May 19th, 2016- 25% off any order over $175 using code BLOSSOM

I just ordered some CREE canopy LED lighting from them. With discount it worked out to about $300 each and free shipping

How do you get the info on the discount dates? I have ordered from them several times, signed up for email notifications, etc. but never see the "specials"?
 
This code out today.
20% OFF Orders of $250 or more 25% OFF Orders $350 or More!*
Shop Now
Enter code at checkout: TAVY166GUG
One-time use code.
Offer valid until April 27, 2016 - 11:59 PM CT
Promo Code Here
Shop Trash & Recycling Containers ›
Shop Painting Supplies ›
Zoro

ORDER ANYTIME AT WWW.ZORO.COM—Most orders ship same day!
call 855.BUY.ZORO (855.289.9676) • fax 855.FAX.ZORO (855.329.9676) • email askzoro@zoro.com

*20% off $250+ OR 25% off $350. Maximum savings of $2,000. Enter code above at checkout. Limit one (1) use per customer. May not be combined with any other promotions or discounts. Order minimum is required - excluding tax and shipping.. Offer may not be applied to previous purchases. Promotion is non-transferrable. Offer valid until April 27, 2016-expires 11:59 PM CT.

Our customer service hours are Monday thru Friday from 6am to 9pm (CT) and Saturdays from 7am to 5pm (CT).



© 2016 Zoro Tools, Inc. All rights reserved.
909 Asbury Drive
Buffalo Grove, IL 60089
United States
 
may 19th 2016- 25% off $175 or more code "blossom"
June 27th , 2016 - 20% off $200 or more code "warmingup"
July 18,19 2016 -$50 off an order of $250 or more code "cookout"
August 8th 2016-10% off 100 or more code "autumn"
September 5,6 2016- $25 off $100 or more code" falltime"
October 11, 2016 -10% off $125 or 20% off $225 code "usetools"
November 17th 2016 15% off $125 or more code "freezing"
December 5th 2016 free pocket knife with order of $150 or more code "blade"

These are in addition to about one discount email a month, so it's worth getting on the list
 
I just put these codes in the LED light thread but thought I would add here in case some guys are following that.

The code for cyber monday (11/28/16) is CYBERSAVER It's good for 25% off any order of $150 or more. Shipping is also free on most order over $50.

There is a 30% sale on Black Friday (11/25/16) on hand and power tools code HANDIT2YOU
 
That code will come in handy tomorrow. I will be buying a Milwaukee 12v grease gun to pair with my favorite tool of all time 12v 3/8 Milwaukee ratchet. Best tool in my mind if you do work around the automatics.
I just put these codes in the LED light thread but thought I would add here in case some guys are following that.

The code for cyber monday (11/28/16) is CYBERSAVER It's good for 25% off any order of $150 or more. Shipping is also free on most order over $50.

There is a 30% sale on Black Friday (11/25/16) on hand and power tools code HANDIT2YOU
 
That code will come in handy tomorrow. I will be buying a Milwaukee 12v grease gun to pair with my favorite tool of all time 12v 3/8 Milwaukee ratchet. Best tool in my mind if you do work around the automatics.

I wish I had known Vinh - I just sold my grease gun yesterday on ebay. The hose is proprietary and doesn't have a good bend radius, so it didn't work well on a lot of the fusion X fittings. It was OK on the wizard.

I just got a postcard from zoro-

25% on Dec 1 with $150 purchase code speedsaver.

20% off Dec -9th with $200 purchase code snowhaulz

30% off $500 or more Dec 13=14th code bigtoyz
 
Just used it---saved $106 on $425. Not sure how in the heck they do all these deals, plus free shipping. I just hope they keep doing them.
 
Just used it---saved $106 on $425. Not sure how in the heck they do all these deals, plus free shipping. I just hope they keep doing them.

They do it by starting with a very high price. I can get most items that Zoro has about a third cheaper if I shop around a little.
 
Back
Top