The wash I have has 5 bays of self serve equipment, made by Ginsan.The stinking ba$tards that put this in, can you say Barry Boyd and Mark Zeledick, really screwed the then owner. They took out a perfectly good operating, and less than 2 years old, Stack pump stand by Magic Wand. That system took up a little less than half of the floor space than this thing does. Floor space is coveted in most equipment rooms. So why do some keep making this in single stand per bay configuration? Ginsan is not the only one who does this, I just happen to own it. If you look on ebay all you see is the same setup. So let's recap. The single bay setup costs more than a stack system, takes up twice the space, ande is no easier to work on. (Dan at Ginsan, please don't take this personally, I just hate the engineering, or lack thereof.)
Self serve pump stands, or what were these idiots thinking
- Thread starter mac
- Start date
Dan kamsickas
GinSan Technician
No offense taken. The thought process back then was that a "bench style" like you have would be easier to work on and they looked really impressive on a trade show floor. Heck, I can think of a few people who when they had their washes built had the door to the equipment room a "glass wall" so customers could see the equipment. The thought of the average car wash owner keeping their equipment room clean enough for that still makes me laugh. It's been at least a decade(probably more) since we built a stand like that.
OurTown
Well-known member
I know of a wash near me that does not have a glass door but a pretty long glass store front type wall in the front to show off the pump stands. It is interesting looking but I would feel like I was an animal at the zoo working in there. That wash was not kept well the last time I drove by (it might be shut down now) but it might have looked awesome when new. Here is a google street view of it zoomed in.
MEP001
Well-known member
I don't think it would last five minutes at mine.
There's a wash near me with a glass door and about a foot of storefront window on either side. It looked good when it was new 25 years ago, but when the equipment was replaced a couple years ago it looks like they put up a wall inside to hide the view into the room.
There's a wash near me with a glass door and about a foot of storefront window on either side. It looked good when it was new 25 years ago, but when the equipment was replaced a couple years ago it looks like they put up a wall inside to hide the view into the room.
cantbreak80
Maybe I need new clubs
This one would look good behind a storefront window, don't ya think? [sarcasm mode - OFF]
cantbreak80
Maybe I need new clubs
Mac,
That rack is NFL...
soon to be replaced with one similar to this.
That rack is NFL...
soon to be replaced with one similar to this.
MEP001
Well-known member
There's one thing I like about it, the unit can be pushed right up against the wall and doesn't come out very far. The hardest stuff I have to work on is stacked pumps/motors where the room is too small to leave room behind it for access. As far as general appearance, I've seen much, much worse looking stuff.
Mine 10 years ago....Atrocious! Check out those hydrominder supply hoses draped across the pumpstand...No wonder it never worked very good. The design was almost impossible to work on! Glad I took pictures of it then so I can see how far its come!
slash007
Well-known member
Before and after in 2016 when I ripped everything out and replaced the home made stand with a JC stand I rebuilt. Also added spot free and TF while I was at it.
JGinther
Zip-tie engineer
Trying to find an old picture where someone bolted the pumps and motors to a wood 2x4 frame with particle board under the pump and motor. It worked like you think, so they put a 2x4 wedged between the motor and pump. Permanently solved!
I just removed a Mark VII pump stand and tank mixing bench and made enough room for a new stack rack (4bay), AND an Oasis Typhoon pump rack, AND the Electric control center for it.
I just removed a Mark VII pump stand and tank mixing bench and made enough room for a new stack rack (4bay), AND an Oasis Typhoon pump rack, AND the Electric control center for it.
