What's new

Shampoo not working on Vacuum

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
My product comes out the scrubber & then flip toggle switch & I get air. I think might be a bad "Foam block" inside the scrub brush. If so, where would I buy one of those?
 

chaz

Active member
Joined
Mar 22, 2008
Messages
919
Reaction score
110
Points
43
Location
Cincinnati, Ohio
Kleenrite and others should have the part.

Maybe as simple as small chem line came off at the block. Open trigger housing and take a look
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
good advice. I called KR however, & they don't have the part.
I'll look inside it tomorrow
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
Doyle "Fresh Impressions". It has shampoo, fragrances & spot remover
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
I cut a piece of foam out of an Armor All sponge, works perfectly. I usually use a 1/2" gasket punch to make a pill shape, but I've also done it with scissors.
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
MEP, been trying to get you for a while. Do you still have the same ph numbers? I need to get that other Doyle vac back from you.
409)200-4667 is my cell #
 
Top