D Davidson Member Joined Mar 2, 2015 Messages 47 Reaction score 6 Points 8 Location OK Jul 3, 2020 #1 I am getting what looks to be soap in my hp rinse in only 1 bay. What should I check first?
N Noob Active member Joined Oct 11, 2018 Messages 311 Reaction score 28 Points 28 Location TN Jul 3, 2020 #2 Maybe a bad solenoid if your soap is gravity fed into your HP line like mine is? Maybe the solenoid is hung open?
Maybe a bad solenoid if your soap is gravity fed into your HP line like mine is? Maybe the solenoid is hung open?
C CarWashBoy Active member Joined Apr 24, 2015 Messages 262 Reaction score 119 Points 43 Location USA Jul 3, 2020 #3 I second solenoid!!
E Earl Weiss Well-known member Joined Aug 31, 2007 Messages 6,371 Reaction score 941 Points 113 Jul 3, 2020 #4 I have a multi compartment tank and found the seal between compartments was no longer good.. If no solenoid issue and you have this setup . Fill rinse compartment and empty soap side and see if any water leaks thru. Last edited: Jul 4, 2020
I have a multi compartment tank and found the seal between compartments was no longer good.. If no solenoid issue and you have this setup . Fill rinse compartment and empty soap side and see if any water leaks thru.
Roz Well-known member Joined Oct 29, 2017 Messages 1,335 Reaction score 767 Points 113 Jul 3, 2020 #5 Take solenoid apart and use a can of air on the components. Usually we have found a small piece of junk inside which was the issue.
Take solenoid apart and use a can of air on the components. Usually we have found a small piece of junk inside which was the issue.
MEP001 Well-known member Joined Aug 30, 2007 Messages 16,665 Reaction score 3,946 Points 113 Location Texas Jul 3, 2020 #6 The least likely thing would be the high pressure hose trapping some soap and releasing it on rinse. I've seen that happen a number of times.
The least likely thing would be the high pressure hose trapping some soap and releasing it on rinse. I've seen that happen a number of times.
D Davidson Member Joined Mar 2, 2015 Messages 47 Reaction score 6 Points 8 Location OK Jul 4, 2020 #7 Thanks for all the replies. It was debris in the solenoid.
