Evidently these aren't made much anymore .. I've googled and can't seem to find them anywhere. I believe it's referred to as an 'interval' timer - It allows the solenoid to open for a set amount of time when the spot free maker activates which allows most of the water to be rejected (I assume basically evacuating the lines), then closes the solenoid so that more water goes into the spot free tanks. I've found the 'delay on make' and 'delay on break' versions, but they don't seem to do the same thing as the interval version - am I thinking about this correctly? My current solenoid is normally closed .. I guess I could change it out to normally open and use the 'delay on break' version?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Solid State Timer for Spot Free System
- Thread starter bigjws
- Start date
MEP001
Well-known member
Unfortunately, I don't think that will work unless I'm looking at it wrong. For one thing, it's 120v (I need 24vac, although I'm sure there are this this kind of timer for 24v). More importantly, I need it to come on for say 45 seconds when it's energized (when the spot free water maker pump comes on) and then shut off .. this allows for 45 seconds of dumping water into the drain and flushing out the system before the solenoid is closed water is put into the spot free tank. It's not a matter of coming on at certain times of the day, but when the spot free maker activates.
I like the schneider 821TD10H. It is a multi function and multi voltage timer. It has 10 different timing functions to chose from and can run on any voltage from 12-240V DC/AC. Wire it up then go through the functions and you will find the timing function you need. I believe its going to be function "I" but not positive as I don't have one infront of me to test. It does have the function you need as I have used them before for similar purposes. Also, it has two LED lights that indicate when there is power and when the timer is running.
www.radwell.com
Hope this helps!
Manufactured by - SCHNEIDER ELECTRIC MAGNECRAFT
821TD10H-UNI Controls & Indicators from SCHNEIDER ELECTRIC In Stock, Order Now! Same Day Shipping, 2-Year Warranty - TIME DELAY RELAY, 12/240 VAC/DC, SPDT, 0.1 SECOND TO 10 DAY, DIN RAIL MOUNT
www.radwell.com
Hope this helps!
McMaster-Carr has them in any voltage you need.
www.mcmaster.com
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
