My site mgr walked into the equipment room at one of our two locations this morning to find a rain forest with water spewing all over from a broken hose. It got our PDQ Laserwash360 control box causing that system to malfunction, but we may have that issue resolved with a new node board that we'll be picking up shortly. HOWEVER, the wet environment apparently caused the motherboard in the computer that's used to run our credit card system to shoot craps. And, upon further investigation by the local computer repair shop, the hard drive is apparently bad, too. So, we need a new computer, but we also need the carwash software from our vendor to load onto it, or we just need to get a computer overnighted to us from our vendor with the software already loaded (which the vendor said he keeps on hand in case of emergency). So... answer's easy, right? Call the vendor and get it shipped!! Not so fast. Our vendor rarely answers his phone or responds to message in a timely manner. Not even completely certain he's really still in the business since he's mentioned other things that he's been doing the last few times my site mgr has talked to him, and we haven't gotten a response from our calls and texts to him today.
So... this just may be the catalyst that causes us to have to make the leap to a different wash mgmt. system. Any recommendations for a system that can merge data between two sites (for fleet card management) and that will operate in a Hamilton ACW? Ideally, it would also be able to track all of the sales data and provide auditing info for each bay. And it would also be ideal if it could be tied into the PLC modules and card readers that are already installed in all of the bays. Both of our sites have 1 automatic and 5 self-serve bays.
Thanks in advance for any advice!!
So... this just may be the catalyst that causes us to have to make the leap to a different wash mgmt. system. Any recommendations for a system that can merge data between two sites (for fleet card management) and that will operate in a Hamilton ACW? Ideally, it would also be able to track all of the sales data and provide auditing info for each bay. And it would also be ideal if it could be tied into the PLC modules and card readers that are already installed in all of the bays. Both of our sites have 1 automatic and 5 self-serve bays.
Thanks in advance for any advice!!