My spot free has stopped working on 1 bay in my 4 bay wash. When I switch it on in the bay the gun does not spray water, there is no pressure. I've checked connections inside the meter box and they look and feel snug. I checked connection at the control panel in the mech room and it also looks and feels snug.
All the other functions are working in that bay. And spot free is working (at least the gun is spraying water) in the other bays.
Any trouble shooting steps I can take to track down what is happening?
The original equipment is national pride and I added an off the shelf generic RO system and water softner this summer.
All the other functions are working in that bay. And spot free is working (at least the gun is spraying water) in the other bays.
Any trouble shooting steps I can take to track down what is happening?
The original equipment is national pride and I added an off the shelf generic RO system and water softner this summer.
