Stopping Brush/Wand Theft - This Product Work ?

[Bandit]

Any experience using this product or similar ? Does it work ? Thieves cutting through the rubber hose. Look like magic immigrant detailers.

And yes, my cameras work , they are taking off their license plates.........so classy.
Thanks to all !

 

[Randy]

NOPE! it won't stop the thieves. Your best bet would be to use HP hose. Something like this https://www.kleen-ritecorp.com/p-11...ngle-wire-braid-hose-025-in-mpe-3000-psi.aspx

 

[mac]

You can absolutely stop it. Just takes spending a night at the wash. Bring lots of coffee and bullets. If you don’t have a carry permit bring a big club. Use it on the perps and their car. Sad to have to go to this.

 

[Bandit]

You can absolutely stop it. Just takes spending a night at the wash. Bring lots of coffee and bullets. If you don’t have a carry permit bring a big club. Use it on the perps and their car. Sad to have to go to this.

Ur probably right.

 

[Bandit]

NOPE! it won't stop the thieves. Your best bet would be to use HP hose. Something like this https://www.kleen-ritecorp.com/p-11...ngle-wire-braid-hose-025-in-mpe-3000-psi.aspx

Thanks yes, this is what we use, they cut thru it.

 

[Randy]

Thanks yes, this is what we use, they cut thru it.

Many years ago we used that clear wire reinforced hose, it was garbage, it had a permanent coil to it. It looked terrable hanging on the wall.

 

[MEP001]

Thanks yes, this is what we use, they cut thru it.

With what, a grinder?

I've never had an issue with the Kuri-Tec clear wire reinforced hose maintaining a coil. I've been using it for 30 years. If they're cutting wire braid hose, the single wire won't even slow them down.

 

[Greg Pack]

I wonder if you could run a length of stainless wire from the boom through the hose and handle and attach to the head somehow.

 

[soapy]

I use a electric branding iron with my wash name to label all my brushes and vac ends.

 

[MEP001]

I wonder if you could run a length of stainless wire from the boom through the hose and handle and attach to the head somehow.

That would still be easier to cut than steel braided hose, but I like the idea. You could crimp a loop around a washer on each end, one under the brush head and the other through a 1/2" fitting. It would also help prevent someone from unscrewing the brush and handle from the hose and stealing it.