Swivels on HP hoses

[washregal]

What is best recommended for swivels on HP hoses - have run into an issue where low pressure applications swivel leaks - High presser soap / rinse the swivel seals fine.. Does anyone have a really good go to swivel they recommend for HP gun applications that also operate low pressure functions?

 

[MEP001]

I use brass Adams 7080 at both ends. A 1-foot "swivel saver" hose will make the top swivel last longer. The ones I've tried at the gun that last longer end up getting stiff and not swiveling under high pressure.

 

[Randy]

We use this swivel from KR https://www.kleen-ritecorp.com/p-41...-x-f-brass-high-pressure-swivel-2000-psi.aspx at the gun and another one up at the boom.

 

[Waxman]

I've had good luck with the value line swivels from Kleen Rite.

 

[washregal]

Thank you for the help on this topic - much appreciated.

 

[JustClean]

Mosmatic swivels (but really expensive)

 

[Mchas]

I use the stainless steel swivels from KR and then repair them when the plastic parts inside wear out. Slightly more expensive upfront but easy to repair and they last a long time.

 

[traveler17]

What is best recommended for swivels on HP hoses - have run into an issue where low pressure applications swivel leaks - High presser soap / rinse the swivel seals fine.. Does anyone have a really good go to swivel they recommend for HP gun applications that also operate low pressure functions?

Great thread, at least for me. The value line from kleen rite start leaking low pressure way to soon !!