Timer shutting off at 1 min

[CarWashGuy316]

I thought it was maybe my gin San timer in the room causing the error but I put a new one on and nothing

thought maybe it was shorting when the 30 second alarm was going on but not that either

I presume it’s the timer in the bay itself?
Any trouble shooting ideas for a newbie

 

[MEP001]

I thought it was maybe my gin San timer in the room causing the error but I put a new one on and nothing

What does that mean? Nothing works, or nothing changed?

The timer in the bay is a slave. It needs to be set at the same time as the one in the control cabinet, which it what actually controls the power.
The alarm is supposed to go off at 1 minute remaining and isn't adjustable, which means your timers aren't set the same.

 

[CarWashGuy316]

My issue is this occasionally occurs. It’s not happening every single time. It runs normal for a while then doesn’t.

When it does not work properly it stops at 1 minute

 

[MEP001]

My issue is this occasionally occurs. It’s not happening every single time. It runs normal for a while then doesn’t.

It helps to supply that information in the initial post.

Have you checked to make sure the two timers are set to the same time?

 

[CarWashGuy316]

Yeah I worded poorly in initial post. Apologies. I’m headed up there now gonna check that out.

 

[Randy]

I'd probably upgrade the timers to a Dixmor LED-6 timer and get rid of the Gin-san timers.

 

[Dan kamsickas]

I'd probably upgrade the timers to a Dixmor LED-6 timer and get rid of the Gin-san timers.

If I understand the OP correctly, they don't have a choice. It sounds like they have a GS31 countdown display in the bay and those have been obsolete for a year.