Touchless Car Wash Doors

[charliewash59]

Any suggestions on good brands of touchless Car Wash Doors. And what price we should expect to pay for 2 doors.
I have a quote on a Wayne Dalton TS200 White Flush for $8900???
What other brands are out there?
And wait time for this door is almost 4 months??
Thank you!

 

[george361]

XRS - typically the preferred solution by most wash owners
Goff - will sell factory direct, giving you option for some savings if you want to install your self. Their new wash guard door is a nice improvement over prior offerings and you will find them to be 30-40% less than XRS if you buy direct.

 

[srr5008]

We just went with the Airlift XRS and are pretty impressed with them so far (not that they've gotten much use in the warm weather). What we found was that both polycarbonate and vinyl were about $10k per door, installed - the price difference between the two was negligible.

 

[Waxman]

I went with the Airlift Doors, Vinyl roll-up, with electric ( not air ) operators. They are not cheap, $8000 ish per door. But I did my homework and this seemed like the best option for me.

 

[washnshine]

I see the XRS Airlifts are being installed on more and more tunnels and express tunnels- I used to see them mainly on IBA’s but they are finding there way to many washes.

 

[washnvac]

Reviving this old thread. Has anyone installed the Airlift XRS doors in 12'W x 10'H recently? I need to replace 4 poly doors, and looking to see what current pricing is running. Thanks in advance.

 

[OurTown]

Reviving this old thread. Has anyone installed the Airlift XRS doors in 12'W x 10'H recently? I need to replace 4 poly doors, and looking to see what current pricing is running. Thanks in advance.

About a year ago, the XRS Elite Plus cost just under $10K for the entry door and about $700 more for the exit door with the strapeze.