Tri-Foam SS Rebuild Suggestions?

[Aje417]

Greetings,

I've acquired a wash that is many years old. I'll be rebuilding the SS attic box, re-insulating, replacing damaged lines and old fittings.... etc. The current tri-foam is setup like so (see pic). Any suggestions on a better design or build? I'm new to this, so any suggestions and patience is much appreciated.

Running a General Pump with flojet.

Thanks,

Aaron

 

[MEP001]

Must be a D&S trifoam. Better design would be removing two of the pumps, moving or replacing the color-switching solenoids with ones on the outlet of the tank (Be sure to add strainers) and run one liquid and one air line to the bay through a foam generator.

 

[Aje417]

MEP001 - Thank you for the response. Does it matter where the foam generator is placed? Can it go somewhere in the attic?

 

[MEP001]

I would put it as close to the boom as possible.