M Mick Member Joined Jul 25, 2021 Messages 48 Reaction score 3 Points 8 Oct 4, 2021 #1 Can anyone tell me how you recalibrate the ultrasound sensors on PDQ M5 thanks
A APW Well-known member Joined Jun 9, 2013 Messages 864 Reaction score 390 Points 63 Location South Oct 5, 2021 #2 If you are talking about the side ultrasonics put the machine in maintenance mode "instant 20" . And then push "config 5" and then enter. It will go to the home position when it's done.
If you are talking about the side ultrasonics put the machine in maintenance mode "instant 20" . And then push "config 5" and then enter. It will go to the home position when it's done.
M Mick Member Joined Jul 25, 2021 Messages 48 Reaction score 3 Points 8 Oct 5, 2021 #3 sorry I’m sure I follow. Is this done with the remote control or on the cumputer?
G GoBuckeyes Self-Serve and Automatics Joined Aug 30, 2007 Messages 1,076 Reaction score 347 Points 83 Location Cleveland Oct 5, 2021 #4 You can use the remote control to do that.
M Mick Member Joined Jul 25, 2021 Messages 48 Reaction score 3 Points 8 Oct 5, 2021 #5 Ok thanks we’ll give it a try. Thanks for the help
