What's new

Upgrading from a GL to a Commander

Roz

Well-known member
Joined
Oct 29, 2017
Messages
1,335
Reaction score
767
Points
113
I assume everyone who has a Commander is still happy with them? We are upgrading from GL to Commander for the added look and functions as we have Hamilton DAN & Hosted Solutions too. Will be selling the GLs (2) whenever the Commanders show up. I hear at the show that finding a GL is hard as I think Hamilton is trying to phase them out of their production line. They are workhorses.
 
Last edited:

DiamondWash

Well-known member
Joined
Aug 31, 2007
Messages
2,371
Reaction score
478
Points
83
Location
Des Moines, Iowa
I have a friend that went to the ICA show and was told DRB has plans to phase out the WS2 very soon.
 

bert79

Active member
Joined
Jan 11, 2018
Messages
241
Reaction score
92
Points
28
Location
West Michigan
We placed an order for a Commander about a month ago. We're replacing an ACW4. Went with Hamilton again because the ACW/GL are workhorses and quality built. We ordered our Commander with the Mars Cashflow validator. Just got back from the show and talked with the guys at Hamilton. I had a very hard time finding out about a ship date on our machine. Learned today that it looks like beginning of August is likely. I do understand the supply chain issues right now but wanted others to be aware. The guys at the show also showed me the Mars Cash Flow validator and boy does that thing looks nice! They pull in the bills FAST and according to Hamilton even at an angle! We ordered a second validator as a backup because if supply continues to be an issue we wanted one on shelf. I have talked to several owners of the Commander who currently have them in service and every one of them is very happy. There is a bit of customer training to be done (as has been discussed here) but certainly not something that we haven't done before.
 

Jim64

Active member
Joined
Sep 17, 2018
Messages
116
Reaction score
42
Points
28
Location
TN
I’ve had one since May 2021. Love it, would buy another.
 

Roz

Well-known member
Joined
Oct 29, 2017
Messages
1,335
Reaction score
767
Points
113
Good to know. My only beef would be having to switch cc processor to WorldPay. Chase is much easier and customer friendly
 

Jim64

Active member
Joined
Sep 17, 2018
Messages
116
Reaction score
42
Points
28
Location
TN
I was never a huge fan of worldpay in the past. When I got the Commander I was switched to a Hamilton group rate. My last statement showed fees of 3.7%
 

Roz

Well-known member
Joined
Oct 29, 2017
Messages
1,335
Reaction score
767
Points
113
I was never a huge fan of worldpay in the past. When I got the Commander I was switched to a Hamilton group rate. My last statement showed fees of 3.7%
Have you checked that you are not being charged E-XACT fees too? They never showed up on the WP statement but we saw them on our bank account statement. Our WP fees were 4.5% to 7.5% in our short use of them on our Goldlines.
 

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,858
Reaction score
2,208
Points
113
Have you checked that you are not being charged E-XACT fees too? They never showed up on the WP statement but we saw them on our bank account statement. Our WP fees were 4.5% to 7.5% in our short use of them on our Goldlines.
There are no E-XACT fee's with the Commander ACW.
 

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,858
Reaction score
2,208
Points
113
I hear at the show that finding a GL is hard as I think Hamilton is trying to phase them out of their production line. They are workhorses.
There are a lot of the Goldline ACW's around, I got call last week from a operator who was wanting to sell 4 of them.
 
Etowah

Roz

Well-known member
Joined
Oct 29, 2017
Messages
1,335
Reaction score
767
Points
113
There are no E-XACT fee's with the Commander ACW.
So I checked. The answer depends on the top level credit card processor, not the machine. With the chip reader credit card machine the only processor available is WorldPay as Hamilton made a deal with WP for that hardware. They bundle the EXACT fees into their fees. When we tested the chip reader and had to use WP our fees ran about 3.7-4.2% however for our Hamilton APP they were charging us 8-10%. In part due to the lower volume. I tried to get them to bundle the two accounts into one to lower the fees for the app but they would not do so. Not certain as to the reason. For the swiper cc reader you have a few processor choices.
 

Ecsb82

New member
Joined
Jun 2, 2022
Messages
2
Reaction score
0
Points
1
I assume everyone who has a Commander is still happy with them? We are upgrading from GL to Commander for the added look and functions as we have Hamilton DAN & Hosted Solutions too. Will be selling the GLs (2) whenever the Commanders show up. I hear at the show that finding a GL is hard as I think Hamilton is trying to phase them out of their production line. They are workhorses.
Did you re-use your existing d.a.n.? Did you have any trouble getting the commander to show up and run financial reports and wash counts? Mine won't show up for that stuff but does show on the home screen.
 

Roz

Well-known member
Joined
Oct 29, 2017
Messages
1,335
Reaction score
767
Points
113
Did you re-use your existing d.a.n.? Did you have any trouble getting the commander to show up and run financial reports and wash counts? Mine won't show up for that stuff but does show on the home screen.
I have put my upgrade on pause after speaking with a few commander owners. I will wait until some of the bugs are ironed out. I suspect they are working on an upgrade to that system.
 

TSchmitz

Member
Joined
Feb 27, 2020
Messages
36
Reaction score
23
Points
8
I have put my upgrade on pause after speaking with a few commander owners. I will wait until some of the bugs are ironed out. I suspect they are working on an upgrade to that system.
Would you mind sharing those bugs?
 

Roz

Well-known member
Joined
Oct 29, 2017
Messages
1,335
Reaction score
767
Points
113
The two people I spoke with is not a huge data set. The main issues were replacing several hardware components in the first two years and integration with the DAN system. There was a minor issue with slow cc processing too but that could be due to the cc processor. Once the issues where fixed things seem to have been smoother.

I will look for their contact info and PM you with it. Don’t want to publish anyones info.
 
Etowah
Top