What's new

Used Touchfree make sense?

robert roman

Bob Roman
Joined
Sep 11, 2007
Messages
2,200
Reaction score
3
Points
36
Location
Clearwater, Florida
“You would have to spend $190 K to get 20 CPH from a roll-over.”

“Belanger Freestyler is $75k and can do a good wash in under three minutes.”

That’s how a sales person would answer.

I’ll qualify.

Base price for five-brush roll-over is $50K to $75K then add-on accessories, support equipment, dryer, options for top package, touch-screen pay station, installation, FOB and sales tax.

How many quotes would you need to see?

I tried Belanger’s build-a-wash program but it didn’t send an e-mail to activate my account.

“….can do a good wash in under three minutes.”

Roll-over moves average of about 30-seconds a pass. So, soap, wash and rinse takes 3-minutes (includes enter/exit bay) or 20 cars an hour, wet wash.

Standing dryer would add 30 seconds or 17 cars an hour or less. Soap, wash, wax, rinse and dry take 4.5-minutes or 13 cars an hour or less.

Most “systems” I’ve seen that can produce 20 cars an hour and high average ticket cost between $175K and $200K.

Yes, NASCAR "team" is as much as $15 million for campaign but you can buy a sprint series "car" for $150K (6-cylinder baby NASCAR), not team.

A shot of Jack and draft beer with a raw egg in it will fix that upchuck feeling.
 

bighead

Member
Joined
Aug 31, 2007
Messages
188
Reaction score
10
Points
18
Gosh Dang it... I was just going to lurk on this thread, but you all sucked me in....

Short answer to the title of this thread: Waxman, since you are now an experienced operator and can do most things yourself, it is the only thing that makes sense.

Let's talk depreciation cost: I know you went inexpensive with your first wash, but all in i believe from memory you were $90-100k all in. Most people are closer to $150k all in (as bob described above with installation and options etc.) Now here's the kicker::: how many washes have you done? I'm going to assume 90k washes for easier math. With those assumptions, you are looking a $1 per wash depreciation cost on your automatic. That is what people don't factor when they do their CPC math, and they really should, because i think that cost is "too damn high."

Now here's where bob's race care analogies come short: engines and transmissions. with a lot of racecars, you are swapping those suckers out constantly, and they're really expensive. With an automatic wash, the direct analogy is electric motors and gearboxes. Now on a $100k race car, a motor is $10k (again, rough numbers for easy math). On a $100k car wash the electric motor is $600 on the high side, same with the gear box roughly, and they are switched out much less frequently. Let alone, the labor required isn't that much (4 bolts and 5 wires) vs. rebuilding a gasoline motor.

What we sell is performance and show. First, everything must work, second, everything must look good. So when you rehab: wrap your auto in new vinyl, or give it a nice acid wash. Make sure lexan is polished as well as the metal. (IE: make it look to the customer like you give a damn, and are keeping things refreshed and new.) Does it mean you need new equipment in the equipment room? Hell no. Not if its working. Put in a new meter face, and let the customer think the magic behind the wall was updated with the meter.

Installation and rehab: all in your cost should be $40kish- spread that over even 100k washes and your depreciation cost per wash is now $0.40. And being an experienced operator, you should be able to pull off the change and get the bugs out of the new machine before it adversely effects anything.

Get a WW 1.0 or 2.0, put 200k more washes on it than it already had, and keep everything looking new and cleaning well, and you will be fine.

And since I am throwing my opinion around: go to a true tri foam (over the single color)... your cpc will be the same, the only thing that will rise is your inventory cost.

man, i must've had stronger coffee than usual this morning. Sorry for the diatribe, if even you all read this whole thing.
 

Waxman

Super Moderator
Joined
Aug 31, 2007
Messages
6,051
Reaction score
1,696
Points
113
Location
Orange, MA
thanks everyone! i am very interested in used equipment at this point.

i highly prefer the inverted L design over gantry style for may reasons.

i am on the hunt and performing due diligence.
 
Top