What's new

Wanted Vac. doors

Tom Thumb

Active member
Joined
Aug 30, 2007
Messages
506
Reaction score
40
Points
28
Location
Orlando,Fl
I am in market for used doors from coleman 93000 type comb. vac. Looking to use spare doors to replace new decals without having vac down while removing and installing new decals.
1- std vac
1- sham/vac combo
1- frag/ vac combo

conact 321-624-2684
 

slash007

Well-known member
Joined
Jul 8, 2012
Messages
2,479
Reaction score
416
Points
83
Location
Lexington, Ky.
you talking about the doors where the timer is? I was able to scrape off and install new decals on my Coleman doors while doors where still on. Thought it would be hard, but only took about 40 minutes each.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
Same here, it's easier to work on with the door off, but it's quite doable still on the vac. Just don't lose the tiny screws that hold the wire terminals to the pushbuttons if you have to take them off.
 

Tom Thumb

Active member
Joined
Aug 30, 2007
Messages
506
Reaction score
40
Points
28
Location
Orlando,Fl
Same here, it's easier to work on with the door off, but it's quite doable still on the vac. Just don't lose the tiny screws that hold the wire terminals to the pushbuttons if you have to take them off.
You are right about doing while on vac, but i am looking at have custom decals made and having spare doots would be much easier.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
Most places can make them accurately if you give them precise measurements. STAGraphics has a lot of them already and they customize for no extra charge.
 

slash007

Well-known member
Joined
Jul 8, 2012
Messages
2,479
Reaction score
416
Points
83
Location
Lexington, Ky.
Most places can make them accurately if you give them precise measurements. STAGraphics has a lot of them already and they customize for no extra charge.
I just got my 3rd order in this week from STA graphics for my Coleman doors. They have the sizes know for all JC doors and customize for free.
 
Top