I know this is a little bit of an older thread, but reading through this I would think it had to be either a bad tbar eye, amplifier or a connection in that circuit somewhere. If the machine passed the mid limit it then looks at the eyes to clear the vehicle. When that happens it makes its turn. So if its turning the eyes showed cleared? Otherwise being on the drivers side it will not resize and continue. So the machine thinks its on the rear of the vehicle. goes to max length then continues. These are the problems that drive us nuts, but once we figure the basics of operation it helps us find when figuring where to look. Hope this has been resolved and your running smooth. Festoons are tedious but not terrible.
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wash World HV strange issue
- Thread starter fastlx
- Start date
