M Morqtrs New member Joined Aug 16, 2024 Messages 7 Reaction score 2 Points 3 Oct 27, 2024 #1 Our Water wizard 1.0 is washing vehicles and going full track length on all of them. The can IRs seem to be fine. Any other suggestions?
Our Water wizard 1.0 is washing vehicles and going full track length on all of them. The can IRs seem to be fine. Any other suggestions?
G Greg Pack Wash Weenie Joined Sep 3, 2007 Messages 4,413 Reaction score 2,222 Points 113 Location Hoover, Alabama Oct 27, 2024 #2 I'm rusty on 1.0 programming but I would suspect an issue with the measurement eye not working. The can eyes would prevent the boom from dropping.
I'm rusty on 1.0 programming but I would suspect an issue with the measurement eye not working. The can eyes would prevent the boom from dropping.
M Morqtrs New member Joined Aug 16, 2024 Messages 7 Reaction score 2 Points 3 Oct 27, 2024 #3 Boom drops OK in contours with the car it’s just that it runs all the way to the end of the track and then comes back when even if the short car is there
Boom drops OK in contours with the car it’s just that it runs all the way to the end of the track and then comes back when even if the short car is there
G Greg Pack Wash Weenie Joined Sep 3, 2007 Messages 4,413 Reaction score 2,222 Points 113 Location Hoover, Alabama Oct 28, 2024 #4 check measurement eyes
