Weatherhead T-460 crimper hose recomendation

[1carwash1]

I have a Weatherhead T-460 crimper with T-400-3C collet (3/8 inch) and yellow, green, & black rings. I was looking on KR's website for single or double braided hose that is compatible with the tooling I have. Additionally, I use "U" series fittings. Looking to replace hoses from EQ room to bays. Can anybody recommend a hose that is compatible with my tooling? Can this machine be used to crimp Synflex?

 

[Randy]

I have a Weatherhead T-460 crimper and use the Continental 3/8” Black High Pressure Hose HO0088 with the 3/8” MNPT X 3/8” HU0606MB fitting and few of the 3/8”hose to ¼” MNPT HU0604MB fittings. I've never tried crimping Synflex hose

 

[MEP001]

I'd recommend calling a Parker distributor and asking them what fitting you need to crimp onto 100R7 thermoplastic hose. Kleen-Rite probably has the fittings, but I wouldn't trust them to get you the right ones with a phone call.