Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What size nozzle for SS triple foam
- Thread starter slash007
- Start date
Waxman
Super Moderator
I use this and it is awesome.
https://www.kleen-ritecorp.com/p-3173-foam-gun-with-nozzle-protector-black.aspx
https://www.kleen-ritecorp.com/p-3173-foam-gun-with-nozzle-protector-black.aspx
Waxman
Super Moderator
i bought 3 colors of this https://www.kleen-ritecorp.com/p-29646-5-gallon-triple-foam-low-ph-conditioner-blue.aspx and the smell / show is great!
I bought those same guns, just not sure what size ss nozzle to put in there as they don't come with a nozzle. Regarding the chemical, ever had issues with it turning to jelly etc.?
Waxman
Super Moderator
bought a new gun from autowashmaintenance and it came with a tip included.
no; never had a problem with the kleen rite lo ph conditioner turning to jelly.
no; never had a problem with the kleen rite lo ph conditioner turning to jelly.
tdlconceptsllc
Well-known member
https://www.kleen-ritecorp.com/p-3173-foam-gun-with-nozzle-protector-black.aspx[/QUOTE]
I use the same gun with no nozzle at all just a 1/8 or 1/4 pipe fitting so the nozzle doesn't come off. You get the air and product ratio"s correct it will work good. Here is a picture of my product with no nozzle I have tryed nozzles in the past but couldn't never get the show like I wanted.
I use the same gun with no nozzle at all just a 1/8 or 1/4 pipe fitting so the nozzle doesn't come off. You get the air and product ratio"s correct it will work good. Here is a picture of my product with no nozzle I have tryed nozzles in the past but couldn't never get the show like I wanted.
2Biz
Thread Killer!
I also use the same gun. Originally my TF system came with 4050 vee jets. Since I run foaming PS through the same gun, the 4050 nozzle was a little big. So I switched them out to 4040 vee jets. I tried several sizes and that tip gave me the best show comparing both products. The vee jet nozzles helps fan the products out.
MEP001
Well-known member
I like this tip:
https://www.kleen-ritecorp.com/p-30...ss2540-18-stainless-steel-male-spray-tip.aspx
Tons of volume and about an 8" wide fan.
https://www.kleen-ritecorp.com/p-30...ss2540-18-stainless-steel-male-spray-tip.aspx
Tons of volume and about an 8" wide fan.
2Biz
Thread Killer!
Correction....
After getting home and checking....I use the Spraying Systems tip instead of Vee Jet...
https://www.kleen-ritecorp.com/p-18062-spraying-systems-h18u-ss4040-18-male-spray-tip.aspx
I run my pump pressure at 80psi and 60 psi air...But both go through Kip Manifolds with 1/8" orifices. So that in itself is pretty restrictive. From the Kip manifolds I run 3/8" poly tubing out to the bays with foamers before it goes through the ceiling and into the boom....Changing any of these variables will change how the foam comes out the nozzle. My suggestion is do what I did...Order a few different sizes and give them a try. Choose the best one for your setup. I don't think you want to go with less than a 40 size nozzle or it will kill the foam. The 40 degree fan worked for me. But maybe at a higher pressure, the 25 degree fan works. Its a crap shoot!
After getting home and checking....I use the Spraying Systems tip instead of Vee Jet...
https://www.kleen-ritecorp.com/p-18062-spraying-systems-h18u-ss4040-18-male-spray-tip.aspx
I run my pump pressure at 80psi and 60 psi air...But both go through Kip Manifolds with 1/8" orifices. So that in itself is pretty restrictive. From the Kip manifolds I run 3/8" poly tubing out to the bays with foamers before it goes through the ceiling and into the boom....Changing any of these variables will change how the foam comes out the nozzle. My suggestion is do what I did...Order a few different sizes and give them a try. Choose the best one for your setup. I don't think you want to go with less than a 40 size nozzle or it will kill the foam. The 40 degree fan worked for me. But maybe at a higher pressure, the 25 degree fan works. Its a crap shoot!
