WSII to a RYKO wash

[WashSystemsSpecialists]

Anyone have any experience marrying a WSII to a RYKO Monarch II? I have a Code-A-Wash System with RYKO entry units now and intend to replace the entry RYKO entry systems with UNITEC.

 

[captain cw]

You'll need to get a Wash Combination selector from Ryko and wire it in. It's not a simple install.

 

[Kipster]

You can also get the job done with a series of relays
you just need to make up wash packages which will be fired by the wash select II
I have done it on several Ryko machines, but not the monarch.

 

[captain cw]

We've done that too. Either way, you will need to have some experience with wiring and a set of schematics. If you want a Wash Combo selector, you might be able to get an affordable rebuilt one from RDM out of Colorado. They sell all kinds of rebuilt car wash electronics.

 

[JLanman]

You can also get the job done with a series of relays
you just need to make up wash packages which will be fired by the wash select II
I have done it on several Ryko machines, but not the monarch.

Thanks Kipster, Quick question to your response that you can basically do the same thing as the Wash Combination Selector. Do the relays all get fired at once or do they need to be fired in a curtain sequence for the Ryko PLC to accept?