WW 1.0 prox counts

[washnvac]

What do you guys have the front and rear prox counts set at in the "service screen"?

 

[Buzzie8]

I don't think this is a setting. This is just to tell you how many counts you are getting. Typically fronts will be around 5 or 6 and rear counts could be anything I think around 60 to 80 depending on length of vehicle. It counts counting wheel prox from when eyes break to when they open.

 

[washnvac]

Right now they are both set to 8. I assume once eyes make either way, then it counts 8 pulses and stops. I was just wanting to get it a little closer to the rear, but wanted to see what others have it set on. I have a Suburban, and it seems the rear glass just does not get a clean as I would like. It seems boom is a little too far away. So this is why I was checking before I make any changes. I will just move it one number at a time and see how it does. It is an adjustable setting.

 

[Greg Pack]

I think mine is set at 7. I actually had it set to six one time and scratched a bumper on a very low profile vehicle.