Ww Razor, 304 Circuit breaker tripping

[David rooke]

As of two days ago, I've had a problem with a circuit breaker tripping. Washview is showing the error "back up eye blocked oe 32"

The eyes have been replaced and are clean.
The 304 CB will trip instantly (within 10 seconds)

Any thoughts?

 

[Waxman]

Here's the page from the manual. Code 32 start up test back up eyes blocked.

on my razor, the photo eye cables lead to a junction box inside the bay. I would start there. Take the cover off and see if you see anything odd inside that box. Excess moisture? Burnt wires? Any red lights indicating a problem on the amplifier? Sounds like it's in that photo eye circuit somewhere and that's where those eyes connect initially before they go into the UCC.

 

[Waxman]

Update?

 

[David rooke]

Okay this ended up being my solution, but I'm sure not everybody's. Earlier in the year the solenoid for your air based weep system died, replaced with another 24v solenoid of a different type, this caused the weep relay to constantly run. After the relay was disconnected the 304 CB would no longer trip, it does show on the wiring diagram that the 701 weep relay runs through the 304 CB so I'm annoyed I didn't find this earlier. Wash was down for 2 and half days before I made the connection.