WW2.0: Alarm 100

[stampedecarwash]

What is the Measurements Eye this Alaram is reffering to? The eyes on each side of the gantry? Or the two prox sensors on measurement wheel? If this Alarm pops up the machine goes all the way to the end of the track since it cannot measure the car?

Alarm pic attached. Thanks

 

[JGinther]

The eyes on each side of the gantry. Its not the counting prox.

 

[Greg Pack]

The measurement eyes are inside the gantry and look diagonally across at each other

 

[Coleman Tech]

Probably a little late responding to this but I just joined. Greg is right. The measurement eye is the diagonal one in the middle of the unit. If this eye is bad the unit will be placed out of service

 

[MEP001]

Probably a little late responding to this

People have been asking for a Coleman tech to join and answer questions for only 25 years.

 

[Coleman Tech]

People have been asking for a Coleman tech to join and answer questions for only 25 years.

I’ll try to keep active for sure.