What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

WW2 Oscillating Motor Tripped | Yaskawa GPD 305/J7 VFD

R

Rainway

Member
HI, our WW2 Red Lion is thoriwing off oscillating motor tripped. The VFD is showing in alarm status. When we reset it does the same thing, oscillating motors not working.

If someone can offer some assistance troubleshooting this it would be greatly appreciated. Thanks!
 

Attachments

  • photo_5134268055726173778_y.jpg
    photo_5134268055726173778_y.jpg
    102.1 KB · Views: 3
  • photo_5136858917438074684_y.jpg
    photo_5136858917438074684_y.jpg
    128.4 KB · Views: 3
  • IMG_0528.mp4
    IMG_0528.mp4
    1.7 MB
  • IMG_0529.mp4
    IMG_0529.mp4
    6.1 MB
Try to run them manually from the vfd. If they will not run, most likely the motor is bad. It is possible it could be wire to vfd or wire from vfd to motor. Check for 220/240 volts across all leads in and out.
 
You must log in or register to reply here.
Back
Top