Menu
What's new
By:
Filters

New profile posts

Etowah
What's new New posts New profile posts Latest activity
O
HELLO HOPE ALL IS WELL I WAS GOING THRU SOME OLD THREADS AND SEEN THAT YOU HAD REPLACED YOUR ROLLERS WITH WASH WORLD BRAND. I NEED TO REPLACE MY GANTRY AND TROLLY ROLLERS. WHAT I NOTICE ON MY MACHINE WHICH IS OLD AND HAD SOME HILBILLY INSTALL IT IS THAT ALL THE ROLLERS HAVE BEARINGS AND A GREASE ZERK.
O
Ontario Car Wash
IF I REPLACE WITH WW I IMAGINE I WOULD NEED NEW STEMS/AXLE THAT THE ROLLER SLIDES ON TO AND I DONT SEE A GREASE FITTING SPOT. IF YOU COLD WALK ME THRU I APPRECIATE YOUR TIME. I ASSUME I HAVE TO JACK THE MACHINE/TROLLY UP TO REPLACE. THANKK YOU
R
Just reading through some of the posts and noticed you have had some issues with Dencar. We were looking into those units a while back and are still waiting. Our chemical rep owns several wash locations and has had a Dencar unit on order for sometime now. What issues did you run into?
Thanks
Ryan
C
Carwashclubber
hi Ryan, nobody wants to whack on a startup company,, willing to TRY and compete w Unitex/Hamilton/bigBoys etc. Still, the issues range from annoyance to serious pathway and time/$ drains. Everyone likes Ron and Phil, personally. Hell, I want them to win...but my patience and wallet are wearing thin.
R
rhino
I can't agree more. I have spoken with Don on the phone a few times and was impressed with him. Just have been hesitant to pull the trigger. Hopefully they will get the issues worked out. Our chemical rep has had his on order for many months. I think his patience is wearing thin as well. When free keep me posted on how things are going and if you make a decision to move on from them.
Thanks
Ryan
P
Hi. My boyfriend and I own a carwash. Our Hamilton bill validator just broke 46-4001. They no longer make those. We were thinking of switching to Mars but we have no idea what one we would need or how to set it up…. Are you any assistance. Thank you so much!
View previous comments…
OurTown
OurTown
Contact Randy on here. He will set you up with a Mars conversion kit.
MEP001
MEP001
The problem with the Hamilton conversion is that you have to cut new holes for the validators because they use upstacker bill acceptors. Etowah Valley uses downstacker units, so they just bolt into the existing holes.
OurTown
OurTown
The kit Randy sold us was not a factory type Hamilton up stacker conversion and did not need new holes cut. It was a down stacker and came with a mounting bracket and of course a harness.
  • Like
Reactions: MEP001
Z
Hey Soapy,
Just curious on how hard it was to buy direct from Zep?
Thanks,
Mike
S
Chad, I was searching for a "verifying" problem I am having on my pay station and your post described EXACTLY what mine is doing. Did you find your problem? If so, can you tell me what you did? Thanks, Cliff (Spindale Auto Wash).
C
test
C
chip@laurel
Very interesting chart of sales numbers you posted, thanks for sharing. The vending sales are what I'm concerned about - do you have our Laurel machines or some other machine(s)? Or is it just one machine?
Waxman
worldpay fee etc.........

Hi Aaron

I hope your new razors are doing great! Mine is 'in progress' and the electrician is taking his time.

Hey, do you still have the 'opt out' link for the worldpay fee thing?

Thanks!

David
N
New Washdog
Hi Dave,

All three bays are operational but the install is not complete. But we are now running, so there's that!
I've racked my brain a bit and I don't recall what your talking about regarding an opt out link for a worldpay fee. I checked all my posts on here and can't seem to find anything? Could it have been someone else?
Wish I could be more helpful!
Roz
What model Wyndstar does it operate? How old is it?
T
Timmb
I don't know if you received the message I wrote you. If you did fine if you didn't you can contact me through my email timmb@reagan.com .this forum it's very difficult to communicate through.
S
Looking for a company in south Florida to service a self service carwash. A lot of different problems including new equipment to be installed.
emerchantpro
eMerchant Pro accepts credit cards to the merchants which are widely used internationally. With Credit Cards Processing Services, the acceptance of Visa, MasterCard etc. is quite prominent for better payment processes.
Enhance your business with best credit card processing solutions for a speedy payment!
Top