What's new

Thoughts on this compressor

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas

It's going in a single bay Petit, & should be a 50 --70cpd site. I would not be shocked if it got up around 80+ & had to add a 2nd Petit.
Would this be plenty for 2 Petits? Or just 1, or is there a better choice for the money?
 

OurTown

Well-known member
Joined
Nov 8, 2017
Messages
3,632
Reaction score
1,408
Points
113
Location
Ohio
Only compressor I will ever own!
Makes the work room so much nicer to work in!!

That is the same company (Eaton Compressor) as the one in Sooner's post and made here in Clayton. I don't know if they are the best but they are pretty quiet and appear very well built. We are planning on buying one soon.
 

Keno

Well-known member
Joined
May 30, 2022
Messages
747
Reaction score
478
Points
63
I seem to remember that 2 stage compressors are much quieter than single stage? Could be mis-remembering. Typically 2 stage are used to obtain higher pressures, which we don't need for car washes, but I believe they are quieter. Might be worth checking into
 

OurTown

Well-known member
Joined
Nov 8, 2017
Messages
3,632
Reaction score
1,408
Points
113
Location
Ohio
I seem to remember that 2 stage compressors are much quieter than single stage? Could be mis-remembering. Typically 2 stage are used to obtain higher pressures, which we don't need for car washes, but I believe they are quieter. Might be worth checking into

The above compressors are both two stage.
 
Top