INSTALLATION INSTRUCTIONS
1. Install or replace long drop bracket on faceplate.
2.
Coin cup may need to be removed and re-attached in order to mount faceplate.
3. Place Microcoin QL into the bracket and secure with lockable brace.
4. The two holes on the lockable brace are designed to fit over the screw heads on the back of the QL
coin mechanism.
WIRING INSTRUCTIONS
Note 1: The blue and green wires are interchangeable.
Note 2: Dixmor timer users should skip to step 4.
1. Connect the black and a blue or green wire to the 24 VAC.
2. Connect the yellow wire to the Neutral.
3. The other blue or green wire (see note 1) connects to the
timer
coin pulse.
4. Dixmor timers only:
Connect black wire to 24 VAC.
Connect yellow and a blue or green wire to Neutral.
Connect the other blue or green wire to timer
coin pulse
Didn't you get installation instructions when you bought the
coin acceptor? We've been tossing the Micro
coin coin acceptors when they fail and are going back to the Slugbuster III. At least you can get a Slugbuster repaired.