cleaning up mud
Member
Has anyone changed the front tredle with a larger stop? We have customers driving past even with the horn!, and back up etc. and then I assume the wash times out...??? 
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Front Tire Tredle
- Thread starter cleaning up mud
- Start date
WW 1.0. It is on the red lion control. I forget what the exact descirption is on the screen. I will look tomorrow, and let you know.
PP#1Laserwashman
New member
Cleaning up mud, have you tested to see if the back-up is working?
Wash your car and drive past the stop into the back-up area and see if it tells you to back-up, maybe that sensor is not working properly.
Wash your car and drive past the stop into the back-up area and see if it tells you to back-up, maybe that sensor is not working properly.
Has anyone changed the front tredle with a larger stop? We have customers driving past even with the horn!, and back up etc. and then I assume the wash times out...???
I had a lady called me last night at 9:15 who was "stuck" inside my bay with the doors down. She had overshot the tredle, backed up, pulled forward, backed up, etc until her time was up. I have this happen quite often and have considered welding a bigger bump on the front of it. I also have problems with people who are only on the treadle by a hair, trigger the wash, and then roll back a little when they put it in park. Which sends the wash home. I have been thinking about changing the arm that trips the prox switch so that they have to be further on the tredle to arm the wash. There are a lot of stupid people out there that keep jumping the tredle, then backing up too far. then repeating it. I believe I posted about this before, but have not found a solution.