What's new

Bill Acceptor Service

Mr. Clean

Member
Joined
Oct 9, 2007
Messages
294
Reaction score
21
Points
18
Location
Central NY
Just a query to see who's using what brand of bill acceptor and what typical maintenance interval and costs are associated with them. Is $100./year/unit high, moderate or low?
Thanks.
MC
 

I.B. Washincars

Car Washer Emeritus
Joined
Aug 30, 2007
Messages
4,284
Reaction score
1,163
Points
113
Location
SW Indiana melon fields.
I've been using Mars for about 8 years now. I think I have 21 or 22 of them. I doubt that I have spent $1000 total on them in the whole 8 years.
 

Indiana Wash

Member
Joined
Jan 19, 2009
Messages
401
Reaction score
0
Points
16
Location
Indiana
I had Rowe bill acceptors and spent at least $100/unit/year in my Rowe BC-1400 changers. I replaced the internals with MARS bill acceptors for $700 each. Since then, I have spent $0/year on them. My Hamilton XE validators have cost about $25/unit/year, but they are only in my acw IV's.

So, my $0.02 is go to MARS! I know I am happy with it.
 

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,858
Reaction score
2,206
Points
113
I repair a lot of bill acceptor/validators and it all depends on how and where they are used. A validator at is in a high volume bill changer would need more maintenance than a validator in a coin box or vacuum cleaner. I see Mars validators that haven't been touched in over 8 years come in pretty regularly. The validator of choice would have to be a Mars validator.
 

washnvac

Well-known member
Joined
Mar 30, 2008
Messages
1,055
Reaction score
183
Points
63
Location
Seaford, DE
I like CoinCo. Low cost; low maint. I have needed service at $100,000 worth of bills, and I have had some go for $200,000 worth of bills. ( I recors counts at changes so I know how many $ worth of bills go through. Avg. maintenance about $200. I dispense all $1 tokens, so stringing is not an issue.
 

Ric

Cantree Member
Joined
Aug 31, 2007
Messages
967
Reaction score
5
Points
18
Location
West Michigan
I like CoinCo. Low cost; low maint. I have needed service at $100,000 worth of bills, and I have had some go for $200,000 worth of bills. ( I recors counts at changes so I know how many $ worth of bills go through. Avg. maintenance about $200. I dispense all $1 tokens, so stringing is not an issue.
Same here. We give them a good cleaning and replace belts, etc. ourselves. Parts are available from online sources. I use http://echangemaker.com/store/html/index.html
 
Top