Just a query to see who's using what brand of bill acceptor and what typical maintenance interval and costs are associated with them. Is $100./year/unit high, moderate or low?
Thanks.
MC
I had Rowe bill acceptors and spent at least $100/unit/year in my Rowe BC-1400 changers. I replaced the internals with MARS bill acceptors for $700 each. Since then, I have spent $0/year on them. My Hamilton XE validators have cost about $25/unit/year, but they are only in my acw IV's.
So, my $0.02 is go to MARS! I know I am happy with it.
I repair a lot of bill acceptor/validators and it all depends on how and where they are used. A validator at is in a high volume bill changer would need more maintenance than a validator in a coin box or vacuum cleaner. I see Mars validators that haven't been touched in over 8 years come in pretty regularly. The validator of choice would have to be a Mars validator.
I like CoinCo. Low cost; low maint. I have needed service at $100,000 worth of bills, and I have had some go for $200,000 worth of bills. ( I recors counts at changes so I know how many $ worth of bills go through. Avg. maintenance about $200. I dispense all $1 tokens, so stringing is not an issue.
I like CoinCo. Low cost; low maint. I have needed service at $100,000 worth of bills, and I have had some go for $200,000 worth of bills. ( I recors counts at changes so I know how many $ worth of bills go through. Avg. maintenance about $200. I dispense all $1 tokens, so stringing is not an issue.