Search results

Thanks so much for the response but everything from the pump stand to the bay has been replaced. Have tried a new VF drive thinking that was the issue but that was not it. The pump is running at 14 HZ like it should. Have pulled all hoses off of the manifold as the 3X is running with nothing...

On a PDQ G5 that is the running pressure for 3X foam

The eyes should be hooked thru an infrared relay on the wall if you follow the lines. Is the relay lighting? could be a bad relay or bad base

We have a PDQ G5 that will not reach 600 PSI to draw the chemical on all three colors. Have tried another VF drive so that is not the issue. Any ideas? Soap is fine at 800 PSI and the HP is running at 1100 PSI. Took the hoses off out at the bay and still get only 300 off of the pump stand