Search results

It will spin it just fine. Not a lot of pressure but it's not designed for pressure.

When I remove the air hose, chemical comes out there???????????????

I'm just using the side blaster pump. I may have to jack it up some day but maybe not. I'll try my hand at touch free cleaning!

I should be so lucky... No it's the bottom one. That's why I've put it off.

I need to replace my bearing though which may mean replacing the whloe shaft. Do I need more than 1 shaft? Thanks

So if you have to replace the shaft and bearings you just leave off the clutch?

I have a bearing out on the tall rear arm of my softgloss. It's been out for a while but functional. Seems that I remember that you usually have to replace the whole shaft. Is that true? Say it's not so! Thanks

No I didn't think to have him do that. I was sure that was going to fix it. I will though. Thanks

My only concern is the low pressure from my prewash pump. I should have pretty good dwell time though for the chemical. Would you use the 0 degree nozzles from the prewash or maybe something with a little more spread? Thanks

I don't want to hijack here but I have a similar problem with my triple foam but only in one bay. I was certain that it had to be the air solenoid. I changed the stem and coil but still just colored water. No sign of air at all. If I had a broken air line wouldn't I be able to hear it? Thanks

We are pulling all of the hose and stuff today and doing the prep work. We will do the final install next time it rains. I feel pretty good about it.

That's good news. Thanks!

I don't behave well enough for my wife to be that heavily armed. I'd never sleep a wink.

We just need another .25 of rain today to make 2011 the rainiest year in history in central Ky. Looks like we will get it because it is monsooning outside. Looking forward to a drier and more profitable 2012!

Yes merry Christmas to all and thanks for all of your help!

I have a set that sprays as they drive in but that is inadequate for wheels so I am adding a second set along with a cta.

I removed my wheel scrubbers and have been unhappy with the cleaning we are doing since. I'm going to add a cta as they drive in and then put spinners where the scrubbers used to be. I'll use the scrubber inputs to trigger the spinner. I think that I am going to have to trick the prox to do this...

Dennis, Where do people wash, at a competitor?

I had a reciever but not the transmitter. Turned out to be the amplifier. Of course now that my doors and heater are fixed it's 60 degrees outside.

I need the transmitting photo eye for my overhead door. Anybody have a good source for these? How do I know which one? When I go to their website I get very confused!