Search results

Greg, thanks you for the info.

Thank you Waxman, I did call Coleman Tech Support and I leave them a message, I am still waiting for them to call me back. Do you or anyone knows where else I can get wiring schematic for WW1.0. Thank again for helping me. PS: I talked to one of the employee in coleman part department he told me...

Here are pictures

Hello all, I have a small car wash with 3 self served base and one automatic Coleman WW 1.0 few days ago my Automatic base was being vandalized. She spent more than three hours there to pull all the wires apart. I want to try to put the wires back together to make it work again. The worst thing...

Thank you Greg, you are correct. The stop light socket is shorted and caused the fuse to blown. Yesterday I went to Granger but they didn't have the socket. I corrected the socket and it good to go. It was another long day yesterday. Thank you again for your help.

Hi all, New fuse replaced, on CP control panel, do the test screen all function are work Properly. All lights are tested good except stoplight. Every time I try to turn on stoplight it blown the fuse. Replaced the 24V DC relay for stoplight on the 1300 channel still failed (fuse blown). I’m not...

Thank you Greg for your information. Yesterday I found a blown fuse(10A) on channel 1300 in red lion. I ran out of fuses yesterday, blown 5 fuses yesterday during troubleshooting and isolation for the cause. On the Gandtry, driver side, found a pin hose leak on one of the block which soaking...

Please help, my auto(WW1.0) except paid but the Enter Now & Drive Forward are not turning on, the auto machine won’t work at all. Manually check the Gangtry and it function normally. There’s no communication between wash Select II and WW1.0 computer. I have no clue where else to test your help...

Thank you very much all for your help. I got it fixed. After checking all the tests I needed to do, still not working. I started to check and see if there is water run through the pumps. Started undo the input and output of the pump with good and strong water pressure coming out, undo the...

Thanks MEP001: I have checked all breakers and all look good. Pumps and contactor coil should be OK because they work on other selection( this is my thought if I'm wrong please advice). Maybe the problem with the control board that's not sending power to the contactor to activate the spot free...

Thanks Soapy: Pumps are not come on at all. Seem there are no power to activate pump. There should be control voltage issue that not turn on when spot free is selected, but I has no clue how and where to start and check it out.

I have WW1.0 and Super Save RO System: My wash has 1 Auto base and three SS bases. Everything else are working fine, but when it gets to Spot-free rinse, pump is not working and there is no water coming out at all. RO System: All visible fuses are checked good and I have switch and interchange...

The Solenoid look real old so I think order one for spare if I don't need it but the price too high I might just skip it. The problem is the boom wide open and regulator is not adjustable and the gate won't work. Colman PN: regulator 3/8 PN: 58056 Gauge 100 PSI PN: 47027 Does anyone...

These are found on the part: LR 51090 MH13513 Model: 8-22 or maybe B-22 12 VDC 24V 50/60 Hz Thanks

Found bad cable on receiver side, Thanks Tom.

Thanks Tom, I'll change the cable today.

The letters on part are hard to read, I'll double check again to see if there is PN. Thanks

Help please, The undercarriage of WW1.0 is not turn on when customer enter to wash. following eyes/sensor checked. Manual undercarriage tested and work good. I clean the door enter eyes/sensor and they seem work OK. Enter eyes/sensors on floor: Clean and both sensors light are lite and seem...

Hello, I'm in need of two solenoid air auto for the boom PN: 64075-1 and 64021-42 (2 stage solenoid block air). Colman price: 64075-1 is $315 ea. 64021-42 is 168.94 ea. Has anyone ordered them before or know where is better source to order them. Please let me know, your help is greatly...

Thank you for all the ideas, I did talk to my security provider months ago about install alarm on my vacuums but the weather is too cold than, he want to wait until warmer weather to install alarm on vacuum. Few years ago, they used to brake in my SS bays coin boxes in weekly basic until alarms...