Search results

I hate to re-visit this, but I took advice and got an inline filter from Lowes (pic). After about a week there is no water, oil, or anything in it. The Flojet is still 'sticking' until I give it a 'rap' on the front and then it work for several hours. Also, I reduced the air pressure to be...

I found the black foam rubber muffler on the one I replaced and put it on the new one. It seems like it should come with one, but did not. The only thing I have between the compressor and the flojet is a regulator. (Pic) I found several on kleenrite, is one needednfor each air line or would I...

I'm not sure of the manufacturer, I've always just called them flojets. 🤷‍♂️

The muffler? I didn't know there should be a muffler, that is all that came with the new one. Is that something I need to purchase separately?

When the pump is not working, it does not work for any Bay. Regardless of which is calling for the foam brush.

All of the bays, the flojet pumps for all of the foam brushes.

I noticed my foam brushes were not working, just air blowing out of them. After tweaking around I realized the flojet was not kicking on. I bought a new one and installed it. Worked like a charm nice thick foam after a few seconds. But now, the new flojet is doing the same thing. The foam brush...

The electric immersion heaters was another solution I am considering. But if I had one would I even need the water heater?

I'm thinking of adding a tankless for a hot rinse, especially during the winter to melt snow and ice. But how does the water stay hot in a holding tank? I was thinking it had to go directly to the water supply that also runs through the hydrominders.

MEP, you mention ISO 68, my local rural king has something called AW-68 hydraulic oil. I would presume it is the same thing just a different brand? Any thoughts?

Thank you! I ordered a cf7512 from D&S

Does anyone have an LM18 through the wall vending machine? I just bought a used one that doesn't have a coin mech. Could you please share the model number of the coin mech that you use?

I'm putting a water heater in my 4 bay SS, there used to be one, but it was taken out years aog by the previous owner. I think I've settled on Navien 240 but would like to get feedback if you use it or what you use. The A version has a recycler which I don't know that I need. My main concern is...

MEP, Did you ever get a chance to measure your bay slope?

Roz, The heat in the floor and the pvc is the main reason for the new floors. Last winter, my first with the wash, we had 4 14x24 skating rinks and ice castles surrounding the weep guns. LOL

I.B. Washingcars Yes, in Ohio. I have plans for individual radiant loops to each bay. I'm not sure if I leave them on the base if they will be effective or if I put them on some type of riser if they will stay in place while the cement is pouring around them.

Thank you MEP001

New cement being poured in my 4 bay, contractor is asking what thickness is required. He thinks 6" but I'm sure I read 4" was adequate for a SS wash with not heavy equipment using it. Also, what is a good angle or slope that works to be comfortable for the users to walk around but still move...

Could this be done with a brush rather than a gun?

I think that is the same, I could not find any info on it.