Search results

Ceramic is the buzzword in car washing right now, if you are going to offer it, you definitely need signs to market it. I have read some people on here charging $5 premium for ceramic in IBA with the right marketing material in place!

Any improvement should be accompanied with a price increase. Usually the chemical manufacturer has some kind of promotional material that you can get. I know JBS has stuff they give you with a minimum order or you can buy it.

Yes they are cat 310 pumps

Thanks for the info, rebuild Kit is almost half the cost of a new valve. I will just replace them When I have to

Thank you for the starting point, will try checking these. First thread I’ve started on this issue as the issue just started a couple days back. Maybe you are confusing me with another member

I haven't changed anything, and don't really know where to start troubleshooting to narrow down the problem before throwing parts at the problem. I am a believer in diagnose, repair, verify from my time working on race cars

The service manual has a procedure to set the tension with the thinnest coin you count. Are you using the service manual? I have it saved in my files if you need it

I replaced the valve today and everything works again. Thanks for the help. Another question, does anyone know the size of the o rings to rebuild? Those rebuild kits are quite pricey for some seals

Where should I start to troubleshoot? Probable causes of this issue? Have the bay closed because of too many complaints of low pressure.

I think you mentioned adjusting the belt tension. Did you set that properly according to the manual? Only reason I ask is because I set it way too tight and it caused me all kinds of jamming problems until I lowered the tension

Ah OK, I understand now, will check for that tomorrow

We have gotten an EZ60 scale to weigh and count the quarters now. Big time saver and as accurate as our counter, within 2-4 quarters per $500 bag. But we only take quarters, you would have to separate the quarters and dollar coins first.

Do the quarters slide freely if you try to move them with your hands through the coin path? Obviously no power to the machine. I had a used counter I bought that the thickness and size gauges were out of adjustment and would jam quarters constantly. After I got those readjusted, no issues. We...

Thanks, makes sense now. I will contact Nayax about the vac timer, I believe I read about the coinless guys using the nayax as the timer in vacs at their test site.

I will check this out, we plan on replacing all the hoses as they are old and hard. Will make sure we make the new ones long enough. Are you talking about the boom mount being angled or something else? The boom mount is installed with an angle towards that side - it isnt perfectly plumb. I'm...

I do have a new valve on order from car Wash superstore, will replace it for now. Will worry about switching to holding tank later, there are way too many more important projects in line before that. Thanks for the help.

Wow! Police have nothing better to do in your area? Like stopping more serious crime?

Thanks for the detailed info on this, we are getting ready to install led 6 timers and nayax in the bays. Quick question, can the min charge be setup different for cash and credit? Ie $3 start for cash and $5 min for cc? Also, I’ve read that nayax can serve as the timer on vacs. Is this true?

Hi group, the booms mounted on the walls for the foam brush don’t return all the way back to home position and we’ve had a few incidents of hoses getting broken off. Is there maintenance or adjustments that can be done to make the booms return all the way back home? I’m sure these booms haven’t...

Hi group, 3 bays in our recently acquired wash have these valves to feed HP chemical. I believe 1 of them is not working correctly - HP soap and wax not feeding to bay and water back feeding into the diluted chemical holding tanks. This site used to be setup for hot water but was removed long...