Search results

I think there was a plunger in the ER, will get one on order if not. Thanks for the tip on the oil mix to absorb water and the TS ISO68. Will report back how I make out. Thanks for all the help thus far.

Got the blue locktite in stock. Thanks for the references on the torque and parts. I confirmed today that the leak is only active when the pump is in use, so it would be the plunger seals according to your earlier post. I have the seals, copper washers, and backup rings on order. Is there...

Which color locktite? This is for one of the 310 pumps. Will check torque specs

It looks like plunger bolt seals included in the seal kit? I looked today, looks like it only leaks when running, and it's a sizeable leak. I'll probably replace all the seals while I'm in there.

I had seen these, but was under the impression they were only for the LED7 timers, I guess I misread the description or the description was updated to include the LED6. $30 sounds better than $200 - but I wonder about the long term durability of the aluminum in the Self Serve environment. I...

Thanks for the info on the warranty and seal kits. My very untrained eye didn't see any washout, but good to know there is a warranty on the 5cp heads. Got another problem now with 1 of the 310 pumps - it is leaking water between the pump body and head. Thinking those are the high and low...

Thanks, will check them out.

Looks like a nice solution. Where did you get that box for the timer and CC reader? I am looking for something like that for a Dixmor 6 and Nayax. Really I just need it for the Nayax - the dixmor should fit in my GinSan meter boxes

Added another pulsating pump today, so 2 pumps were pulsating today - 1 had some debris in the valve, 1 had broken o-ring on a valve. The one with debris is totally fixed, no more pulsations. The one with the broken o-ring, I replaced the valve with a used one I found in the ER from the previous...

This sounds like a good plan. Only I would start somewhere in the middle on the run, that way you have eliminated half the run and know which way to keep moving. Wouldn't it suck if you started at the stand and the blockage was the last fitting on the other end of the run! Been there, done that...

Pressure has come back after replacing the HP line to the bay, but the pulsations are still there. Wash was packed today so I wasn't about to take that bay offline to troubleshoot. Will troubleshoot tomorrow if it is slow, or Tues

Haven't you guys been seeing 100F+ lately

Did you figure out why Bay 3 SFR is on when Bay 1 turns on? Sounds like you may have more than multiple issues going here

What kind of broker is your wife? CRE? CRE 101 - if the appraisal comes in lower than the contract price, negotiations should be started on a price credit. You really need someone with CRE experience in your corner(maybe your wife can partner with an experienced CRE broker and split the...

Both are correct, you have to buy the property for what it is worth right now, not after your potential increase - the increase in cash flow and value is your reward for the risk and work put into turning around a property. If the appraisal came in that low, sounds like its time to get a credit...

Hose was made at a local hydraulic shop for $120, I know expensive, but hose is replaced before the holiday weekend. Pressure returned to normal and pulsations reduced. Will let it run for a week or so and see if more troubleshooting required. Thanks all for the help

Why are so many people giving the OP a hard time? He is sharing a key factor to his high sales to help other wash owners. He doesn’t have to do this and is asking nothing in return. I don’t see what the problem is…don’t like what he has to say, move on…no need to bash him. Is the OP saying...

Welp, found 3 holes in the pressure hose going to the bay, troubleshooting will continue after that is fixed. Original hose from 2005. Getting a hose made by a local hydraulic shop, unless any has any other suggestions

Didn’t you get the memo? Their liberal philosophy isn’t the problem, the problem is the government didn’t implement the liberal philosophy ”correctly” 😂 They will do it”correct” the next time around

yep, ask the residents of Austin, TX how they like the tech companies and workers moving there