Search results

Thanks, yes just one bay. I thought the system had an air solenoid cut-off pictured above the regulator that cuts the air off when not in use?

This morning we pulled up to the wash and the tire cleaner was on and the chemical was pumping out of the gun. The panel was turned off. No one around but the system was on and the flowjet pumping fluid? Any ideas on where I should start troubleshooting? Never seen this problem before? Thanks

I had this exact problem a couple of months ago. Cleaned the swiper a few times with no luck. I had to send the swiper in for repair. They never tell you which part failed but it now works great. I finally bought a spare swiper to have in stock so I'm not down at any one time.

Mine wash was built for rural use knowing mud was going to be a problem so they designed my pits 9 feet deep. Once every year and a half for me seems to be the average for cleaning. Dirty job! Keep those drain pipes clean with a jetter too! Overflowing pit drains with freezing weather is...

That's what I heard. Thanks for the information! I get confused on all these options....

Can something post a link on how to get a loan forgiven not a PPP. I can't find anything on the SBA site and did NOT go through a bank for assistance. Thanks

I use aircraft wire when I need maximum protection. It's Mil-W-22759. I have plenty on hand since we use it for our aircraft cockpit installations. You can buy from a place called Aircraft Spruce. https://www.aircraftspruce.com. Maybe overkill but it works.

Thank you Soapy, This is in line with what I was looking for to replace the obsolete unit. I'll get one on order and may call on you again if I experience problems but looks pretty straightforward. Thanks to all who responded and will report back when it humming along and in service. Thanks...

I have an older Ray Pak floor heat boiler that's running great but the thermostat has not worked in years. The part number is SP-32 made by Goldline. I found a company that rebuilds them and it was returned still not functioning. Has anyone found a replacement unit that's plug and play? 115V...

Two things that helped us when first purchased was we found out optional heaters were available for the bill changer and just plugged in. Another item was the old owner had unplugged the line heater in the hose trough which keeps the lines warm. Other than the weep suggestions keep plenty of ice...

MEP, I think you just nailed it. Last week I replaced the screws and that may be the issue I caused. I will check it out tomorrow but have a strong feeling that's it. Thanks for your keen eye and knowledge! Boy do I feel dumb...

Any ideas why it would bench test fine then when installed fail?

I have an older single rear load vending unit that the pull handle locks up when you pull to vend. It seems to click 2-3 times then locks up? What would I look for to fix the problem? I’ve tried two coin mech’s and bench testing works great? I can't seem to find anything on this site or online...

Thank you for the link. I just ordered some to try out at our SS wash. Thanks David

Would you happen to have the part number you use for the additive? Does Kleen-rite sell it? Thanks

The funny thing about owning a self serve is finding treasures that customers have left behind. Last summer I found a hard top to a Mazda Miata. Posted it as lost, hung signs up, no takers. Sold it for $1000 on craigslist. Oh the things we find.....

Yes the order stated you can remain open if you maintain social distancing on sight. We only have one part time employee that dumps the trash and cleans the bays. The order seems to have some flexibility due the vast number of business who don't fall into the listed ones. Which state are you in?

I'm in Oregon and the state order will not affect our SS wash. At first I thought it would, but we have no employees on sight all day and the public can maintain the 6 foot rule by them selves. We only empty the trash twice a day, look for maintenance issues, and have no contact rules in place...

Mine is $3.50 start for 5 1/2 mins $16 Max. One other thing to consider is calling Cryptopay and lowering the hold charge on cards. When I first installed mine I received calls on why a $10 charge was on the transaction. I got tired and telling them and since then never had a disputed charge. As...

I have all the DH factory manuals for the system. My issue is its been turned off for three years and the previous owner passed away and never told me how to operate it. Picture below. If anyone knows how work it and get it started back up it would be much appreciated. I assume it uses salt as...