Search results

I just experienced the same thing and mailed one back to them for service. Just received it back yesterday with a note that said. No charge we just picked some small debris out of it. You may check that first.

The main one for us is it provides and track record of your business performance for any given day or date range. This will be useful to show prospective buyers as the information is not questionable. I can export data to spreadsheets, create PDF reports and see trends of devices being used and...

I just re-upped mine at $180.00. See the website for details. It's worth it.

I would take a look at POR-15 products. I've used them for years and with the proper prep work will last a long time.

Thanks for checking on that for me. Just got back from the wash and found the coin sensor was gummed up. Cleaned them out and works great. I also solved another issue as well. I've been noticed small chunks of orange plastic in my coin vaults. Not good for hoppers either. Was cleaning each...

Randy, we have the IDX-850 units and one is acting up. Same thing rolling right through. Do the Microcoin use the same metal bracket? Curious if it's a direct replacement. Thanks

I don't wrap them at all. Just fold them a little smaller than the size of the shelf. No jams whatsoever. We use the 16X16. Were looking to install a new vendor which will open our options wide open. Good luck!

I bought Dr Joes black towels from Kleenrite when they were $.36 cents each (now $.45 cents). Vend them for $1.00 and they sell out each week. We have a towel folding party around the kitchen table and prep them for Laurel vending. Could charge more but my current vending machines have...

I stopped fighting them due to how long it took and was never successful. We maybe get 2-3 a year and it's just not worth my time.

I'd do what Randy mentioned on the penetrating oil and go buy the right tools. A good impact gun with the right size allen socket setup would probably do it. I've found cheap allens and cheater pipes just don't work. Keep us posted.

So I wanted to post a small battle I've been dealing with over the past couple of weeks for your humor. My Fragramitics spot shampoo CCD unit stopped making suds. Since I bought the wash 3 years ago it's been working great. I replaced the entire hose assembly 9 months ago just to be sure it was...

Today I inquired about this issue and just received this response from a Cryptopay supervisor. Should be fine but will monitor statements moving forward. They wrote: Good Morning David, Thanks for sending this over. Shouldn't affect you as our card readers are not chip capable. You have 0...

Yah that was the smart-ass side of me MEP. I've had great luck show far.. Knock on wood...

I have to say this thread is enlightening. And to think I've been changing mine every 4 months. You guys have made me very happy. I have 4 Cat 310 pumps going on 26 years of non-stop service and think they would run fine without any oil. Thanks🤠

Thanks for the great info. MEP post makes sense now. I was going to order this replacement. Can you confirm? https://www.kleen-ritecorp.com/p-1852-kip-valves-24-volt-normally-open-stainless-steel-solenoid-valve-1-4-nptf.aspx

It's the small things that separate you from the competition. I love seeing your progress! Good on you!

Thanks, Yes my weep is turned off as it 100 degrees outside. I dream of the days of need the weep. Anyways I'll check the power as Randy suggested. The buzzing sound or electrical hum is only when the foam brush is being used. You can hear it 4 feet away. I put my hand on each component inside...

This weekend I was at the wash and noticed when the foamy brush was being used on bay 1 a humming sound was coming out of the control box. I narrowed it down to the trickle valve making the sound. I don't know the purpose of this valve and why it does this. The tag says DH 18473, 1/8 orfice, 100...

Our Covid impact was business up 40% over 2019. But I'm thinking it was because of our upgrades and great customer service we've been killing our base with. Who knows... We will take it....

Yes, I believe this is true on the IDX mechs. I've had one on order since January. Called them (KR) Friday and they said the new date is Aug 25th now. Been thinking of changing to another unit. I don't need one right now but it was part of my spare parts to have on hand.