Search results

MEP, would this work for spot free delivery? It's only rated at 150 psi. https://www.kleen-ritecorp.com/p-1967-kip-manifold-block-no-metering-2-outlets.aspx#description

I am also fixing to install a Profile and I'm torn on wheel scrubbers or no wheel scrubbers. My distributor says that the brushes clean the wheels a decent amount anyhow so he doesn't recommend them.

I get calls daily as well as some negative Facebook with people thinking I am charging $10 when the sign says $2 for vacuums or $10 when they get the $6 wash. When I explain it to them most of them understand. Well today after four calls it got me to thinking why not change the name of my car...

This is why I don't skim my earnings so when I sell them one day I can command top dollar! A bank won't loan money on winks and promises.

The two meters I want to replace are in the same block column but there is a big void in the block. Im aftaid there won't be any secure way to anchor them once I get the old ones out. The old ones are 10x15 and the new ones are 13.5x17. The column they are mounted in is 32" across. I took a...

I am constantly finding jams in my slug busters due to people putting dimes, nickels, and pennies.

Had the same problem and it was my low pressure pump.

I use a low and high for the presoak only through the arch. The only thing that goes through the Flex Pods are sealants.

Quest. I was putting Shine On Carnuba Wax through the foam n flow but it wasn't applying evenly to the car. I now apply the Shine On through the flex pods and just run florafoam or either red triple foam through the rain bar.

It's the same pipe that comes on the machine.

Anyone know how to post a video? I cut it down to 4 seconds but it still won't upload.

I went ahead and converted my Razor 4 to a rain bar also. Here are couple pictures and a video.

I took the hose off the spot free last night and nothing came out of the solenoid so that rules that out. It seems to be working now that I turned the pressure down to 1100 from 1200 psi. I did not check the HP Wax but that's a good idea to check it also.

It does. I valved off the cold rinse while running HP Soap but it didn't make a difference.

There is a check valve but not on the soap line. It is right past where soap, wax, and spot free tie together. It's a 3/4" check valve that reduces to a 1/2" hose to the pump.

I took all the low pressure hoses off and none of the fittings are cracked. I valved down the gravity water until the pump cavitated and then it started drawing soap. I ended up turning the pressure down from 1200 to 1100 psi and the pump smoothed out and started drawing soap with the gravity...

I'll replace the fittings and see what happens. Thanks guys.

I don't have flow meters and the kip is a non metered. The tubing is 1/2". There is a separate 3/4" spot free hose that T's in that I forgot to check. Maybe the spot free solenoid is leaking through diluting the product.

My 5CP Cat pump will not draw soap unless I valve down the gravity water tank till the pump cavitates then the HP soap is fine. If I adjust the water till the pump smooths out the soap is too weak. I have replaced the kip solenoid and hoses. I have even taken the outlet side of the kip off...