Search results

My Guage is to take the nozzle and place on my hand. If I let go and the suction is enough to support the weight of the hose it passes.

Or phenomenally busy or pits are too small.

I would have to say - Mud may be the exception but even with Shampoo and Vacs it's rare. For whatever reason thick layers of hair just doesn't seem to happen. After many years I may need to replace a vacuum bag because I notice dirt getting sucked into the screen below the motors which means...

Heck. if it is one thing I don't want to have to do is clean filters twice a week or even twice a year. Unless suction is affected - never clean them. They shake themselves out.

I will have to check again but I think my mechs had adjustments for more than 4 quarters but not more than 6-8. After that (per Chip at Laurel) you have to change the mech and door and it's not cost effective.

I think square footage of the filter is not really relevant unless you plan to clean regularly. You need something that self cleans to an extent like the spring loaded cylinders or something that flexes with the on off cycles. Don't see that happening with pleats.

Problem is with wholesale prices climbing I think the manual venders max out at $1.50-$1.75. Consider 5 column for air frexheners.

I have had better success saying something like: "Can you please finish up in a couple of minutes or pull out to finish so someone waiting can use the bay" . People don't like being told what to do.

Hard to tell what if any part of this is serious. Never gotten a complaint. Which zip code of fantasyland would that be? I can see if you have the type of bag filter where you have a hollow cylinder accessible from the bottom like Coleman that even packages a round toilet type brush with...

Like MEP - Rarely remove bags to clean. I think the Cloth bags tend to shake out the dirt as bags flex during on / off cycles. I see the pleated ones needing cleaning regularly since they don't have that ability and if they are like my shop bac dirt gets stuck in the pleats.

The Fat lady hasn't sung yet.

In the SS Bays with LED 7 Timers you can offer "Bonus Time " and it only works for Cash. You can also have a separate minimum start charge for CC and that along with count up compensates for the cost.

I acquired a Belanger equipped tunnel that had Dema injectors drawing straight from the concentrated chemicals attempting to adjust dilutions with the injectors. I refined it by letting the demas inject at maximum capacity and flow and set up Hydrominders with buckets to achieve desired...

That is what I have - not a 2 pocket though. Liked it so much, bought a second.

Chrome / stainless unit Looks like a dema injector. . Long ago a chemical rep advised me that tey are too finicky to use for dilution adjustment. Best to run at mk injection and adjust dilution at the Tank they suck from.

I have a Ribao mixed bill - non sort since bank will take mixed bills. . It's fickle with regard to condition of bills but other than that I was happy enough to buy a second machine.

Well, since debit made up a large percentage of pay at the pump there was really no way around it. If you clear CC thru the supplier they can walk you thru anything you need to do.

To some extent we agree and to some extent you miss my point. While it is possible to use controllers to operate within a fraction of a foot for BOTH eye and loop technology, as you state it is of no practical use for as you say "All" and as I say "Most" pieces of equipment. Since I still...

Can you use LED 7 ? seems to be $262.00

I only dealt with eyes as enter switches for a couple of decades and now loops for a few more decades. Perhaps in a few more decades I will figure out the difference. If you can trigger your functions so that they effectively work within a fraction of a foot - more power to you. I did find...