Search results

Never hd good luck with rubber hinge doors. They seem to get trashed quickly from customers driving out at the end. If it breaks you might consider a steel door replacement.

Is that the door with the rubber hinge?

Some Tips for AVW. Is there a slot under the exit trap door? If so weld a piece of steel across it so if a car drives out and whacks a roller it won't jump the opening into the slot and jam. Are exit door hinges welded if you have a steel door? If so have the fab some bolt on hinges (Round...

What do you have now. Converted many of my 4 foot fluorescents to LED Tubes by removing the Ballast. Alao installed some new 4 foot fluorescents. 4 per bay about 9 feet up the wall placed on sidewall each about 4 feet in from either end.

IMO changers are the life blood of the wash. Add another single (or Double) changer to increase your availability. I added a third after I got the original 2 working and found that if one went down the other was drained in short order and left me with no changer.

My experience with 10's is they make noise but drying is poor compared to 15'.

Why would you do that as opposed to buying a wand? You won't be able to have the pipe tapped at one end of 1/8" nozzle so you will have to add a coupling for a 1/4" nozzle.

Mine is same as MEP but it is above each bay. I think that will make for a quicker changeover - especially for bays that are #s 3-6 from the ER.

Posted on their FB site. Social media director contacted me and told me to call claims and got a phone # . Called and after being on hold and then giving rep I could hardly understand a spit ton of info he told me he would connect me to Claims Another short hold and finally got someone who...

Fed Ex Nightmare. Took 6 items to Fed Ex Pack and Ship. (DRB Relay Boards) Spent hundreds of $ to Pack and ship in 5 boxes. ( Box Had 2 items) First they only give me a receipt with 4 tracking numbers because they forgot one box. Immediately have them add 5th box. Items had stated...

Is this for a Tunnel or SS? I think flat FRP is better for SS since they wont dent or get holes. Also, FRP pebble finish deters graffiti scratchers. Those concerns do not apply to Tunnel applications.

The "Work around" is to accept the nominal chargebacks as a cost of doing business. Perhaps other Cryptopay users will chime in, but if I had to estimate chargebacks on an annual basis the dollar amount would be less than one tenth of one percent. 0r $1.00 for every $1000.00 charged.

Just a guess but check bearings at Drive and Take up. Could be as the roller comes up tension is increased which wll put pressure on bearings and if one is bad you will hear the bang.

First issue is what HAS TO BE replaced? Tanks hold stuff, Pumps pump stuff etc.

No, those are clothes that cannot be worn everyday or anywhere they are specifically suited for the Car wash . :)

Never appeared on my statements.

You are also dealing with the Golden Rule. He who has the gold rules. So, the deep pocket credit card companies make the rules. Had a chargeback at the gas station from a customer with an unusual name, tracked him down and asked why the chargeback. He said CC Company issued a card in his...

Business use of phone and internet.

Welcome tp the CC swipe world. As a gasoline retailer, before Chips which happened a year ago due to various delays, I would get BS chargebacks every couple months and of course they were $25 or more. So, the rare Cryptopay chargeback is a minor annoyance - so much so that I opted for the per...

I have that plate with a hockey puck lock and If you can get that from them they are great but the Plate has a slot that goes over a broad hook on the door and a hasp protrudes so you would need to take your doors to a welding shop to add that. . Perhaps you can have a local welding shop...