Search results

Can you two knock it off? I can't hear my customers spraying high pressure "wax" on their cars over all the bickering.

Screw warranty. There's nothing to it, just solenoids, an injector, water heater, heated blower and tub. You could put it together for about a third of what a complete unit costs, and you'll know how to work on it yourself. https://www.tristarvet.com/product/swivel-ramp-bathing-tub/ That...

I've installed a number of Cryptopay systems for people, most of which originally wanted to go count-down. What you said is how I talked them out of it.

Just make sure it doesn't say "Made with 100% beef."

Almost $500 a week, mine do $600-800 a week, and my customers are extremely wasteful. Last night I watched a guy get change for his laundry - I mix tokens in with the quarters to discourage abuse, and he threw the tokens in the trash. I had just emptied them, so heck yeah I fished the tokens...

I'm sure someone can help you with something more specifically what you want, but I would: Add a small but good-quality backup compressor (Actually just did about a month ago). Change out the room lights to LED (or add a couple low-wattage ones) and just leave them on.

Why, WHY would you bring up the larger denomination coins?

I'm paying a guy that much to clean and dump trash every afternoon so I have less to do at night and can skip a day during the week if I need to. Should I get rid of him and do all the cleaning myself too?

Yeah, 10 HP won't do much. It takes a 30 HP on 208V to achieve 1200 PSI.

That's hard to say. You might be better off parting it out to get the most money. The spinner drops will sell, but I can't imagine anyone would need either the whole gantry or the main shell. In my experience, once it's been run into bad enough to bend the main gantry, everything including...

Then they weren't the exact same model, Belanger uses the ones with the brass seat.

It's within the pressure specs of the valve. I've not heard of exceeding flow of a solenoid.

I can get $10 a day if I do it every day, but I usually do it every couple weeks and throw it all away.

I cut a piece of hardware cloth into a circle, cut the bottoms out of two pails, then put the hardware cloth over the bottom of one and shoved the other over it. Hardware cloth is 1/2" and will catch all coins but won't catch small earrings. You have to clean the vacs just about every day to...

I was thinking manufacturing defect, since any of the three valves would fail on different machines.

I just use a tape measure.

I doubt it's more than 10 GPM. There are three that control the flow of water for presoak, wax, and trifoam, with the chemicals pumped in after them.

FWIW I used S. Thomas to make decals by sending them precise measurements, and they came out perfect. I can't imagine why anyone who makes them couldn't do the same.

That's the same one Belanger used on the Vector units which wouldn't last more than a couple years. On some of them the brass seat eroded.

That's just one opinion. I know that rewarding customers is good for your business. I don't offer any sort of bonus, but I routinely walk through the bays and just drop a buck in for people, especially if I'm in the room and hear someone cycling through all the functions trying to get the foam...