Search results

If the hose from the tank to the pump was bad, the pump would cavitate on soap and wax but not rinse.

Did you check the tip or the regulator or the spot free check valve?

Just disable the button and make each swipe worth so many credits.

What is staying active? The Cryptopay? You might want to configure it so it only gives credits (coin pulses) for time on a swipe.

It's the same with some GinSan equipment that uses the same solenoids. The coils just fail occasionally, and owners learn to keep spares. I think they're GC solenoids, although the coil is branded CFA. Some reps from GC came to us when I worked for a distributor, and we bought a bunch for RO...

I think you linked images directly from your Gmail, which doesn't work.

No wax on one bay on Coleman equipment is 99.9% the solenoid coil or a stuck plunger. The coils commonly fail.

It looks to me like there's either poor coverage from the presoak or the spray tips on one side aren't spraying properly or at all. Half the roof and trunk of the car is clean and half isn't.

It's probably that the stem has an o-ring seal in the base nut and isn't permanently bonded as one piece, so the stem can turn once the nut breaks loose.

Maybe just cut the nut in half.

As long as they aren't like the ones D&S uses - theirs are just a tube with the top as thin as the sides.

Revisiting this since I was reminded of it - I think I could make it work by putting the entrance at what is now the rear and having two gated exits. Crime is still minimal but loiterers and the homeless are becoming a real problem.

Have you done that, and it's safe to do so without cutting through?

"Protest..." There was some minor looting here a couple days ago. Not protests, even though it may have started out that way, I don't know. People were saying that someone left a bunch of bricks out where the protests were planned.

I don't know anything about Autec, but some makers have a program where they install a refurbished gantry for a decent price and take the old one to refurb and sell again. You might also look into a PM program, but I would urge you to learn the machine the best you can to make sure they're...

Do you have any interest in working on it, possibly making improvements, or are you wanting to do a "clean sweep" to keep things reliable? Could you post some pictures of the equipment?

If only that one Hydrominder doesn't draw, it may just need a valve kit or a diaphragm.

What will you be using it for?

Put up a big "Black Cars Matter" sign.

Only the soap Hydrominder? Are there others that are not having the same problem?