Search results

Ok thanks

So you lightly wipe the rollers rolling surface lightly with grease?

PDQ Laser wash M5

Looking for your guys opinion Who have traversing spray arms. Do you use a light coating of grease on the rails or silicone spray. We went to a silicone spray thinking the grease would collect dirt but now rails squeak in cold weather

Sorry evidently my previous post did not go. We moved the sensor back in toward the target and set it about 1/8” away. We moved the target located on the left end (where the arm was over traveling and hitting the end) to the right awa from the end. Hoping it would sense sooner and stop before...

The sensor was set very close to the target I’d say about a credit card width away. The car wash tech told us to set them about 3/8 away but that made no difference. We tried moving the target in farther away from the end hoping it would detect sooner and stop before hitting but still...

Looking for suggestions On a M5 occasionally the arm will over travel and bang into the end when going left. Only hits the end during a high pressure rinse. Again not every time but randomly . We verified the sensor is set about 3/8” from the plate. The sensor light is on when the plate is...

Ok thanks we’ll give it a try. Thanks for the help

sorry I’m sure I follow. Is this done with the remote control or on the cumputer?

Can anyone tell me how you recalibrate the ultrasound sensors on PDQ M5 thanks

I was trying to get info on IBD dryer from DryerPros but get message web site is corrupted. Does anyone have the correct or good web site

very Good suggestion. Thanks

Thanks for the feedback slipping we definitely don’t want. Guess we’ll be sticking with pneumatic

That makes sense and is a simple solution. We’ll reduce the tip size as suggested till coverage is not adequate then bring tip size back up to get coverage needed you guys are correct Lots of helpful information on the forum Thanks

you refersmced dilution tips and Particular injectors. If I’m not mistaken the dilution tips are color coded and the package list ratio and gpm. What are the particular injectors ? just trying to figure all this out thanks

So guys just want to say your replies have been a great help as someone who is new to this I have 2 questions 1: On a Laserwash M5 what metering tip do you recommend for the soap? We replace the chemical pump and soap now foams really well and covers the cars well. But we are using a lot of...

I don’t know it would be nice to find something to replace the pneumatic tires. I’ve seen foam filled tires advertised but still face the problem of getting them on. As is you have to deflate the pneumatic tire in order compress it enough to get it on

you‘re right that was one of our concerns.

Has anyone tried using solid rubber tires instead of tube tires? If they would work it would eliminate loss of tire pressure during season changes. I’m wondering if they would get a good grip or would they be to hard and possible slip

Replaced the pump pressure is up to 200 psi and working great. Thanks for the suggestions did not know the pressure needed to be that high now have excellent soap and wax foam again thank for the help