Search results

The last time I saw inside a city meter box, the 208 WYE leg didn't even go through the meter, so I'd guess they use the same meter for single- and 3-phase. It was funny because the guy had let his power get shut off for nonpayment and his lights and half the vacs still worked. Means he wasn't...

Per the forum rules:

It's also possible that one of the Hydrominder foot valves has failed, or it's not sealing well in the hose. You also need a hole in the discharge hose on the downspout of the Hydrominder, above the liquid, to prevent it from siphoning back to your concentrate.

So now you get to ban his IP address?

I hate Quickbooks Online. Not only is it more expensive per year than just buying the software, and you'll be paying it for as long as you use it, it's very limited in a lot of ways. I've also had a number of times where I couldn't access it when I needed to. The only upside is that I can do...

I see that it didn't.

Exactly why Washworld cloned them, but at least had the sense to build the bridge out of stainless steel.

He also gave us the ability to say such things on a public forum, but that doesn't mean you should.

Mars.

No, because JGinter is right. The PH24M doesn't throttle the water flow by design.

I had put a 5 gal Extreme on, but with the low-pressure part of the presoak not working it went through it really fast and it still didn't clean. I put a barrel of their DuoClean in for both high-pressure and presoak and it's lasting and works well. If we keep this lease, I might pull a new...

The stainless pump won't last any longer pumping RO water. The only advantage is that it can be rebuilt over and over, but the kit or having it repaired by Procon costs more than a new brass pump.

He probably thought the "m" at the end meant it was just for Mike.

I use the 25055, it's not on their site. Here's the 2506: https://www.kleen-ritecorp.com/p-9507-general-2506-18-spray-tip.aspx

You can loop the bypass back to the inlet of the pump, I just prefer to send it to the tank. With a good contactor and a 1 or 2 second delay you hopefully won't have it sticking on, but if it does the pump will crater if it runs all night circulating the bypass. I've seen it many times, in...

I recommend a Procon 2500 series: https://www.kleen-ritecorp.com/p-14581-procon-104e240f11ba-series-4-bolt-on-pump-240-gph-250-psi.aspx You'll need a bypass regulator that will adjust to a low pressure. I use this one...

The antenna on a wifi switch. The antenna unscrews from it like a coax cable.

I'm planning on starting a program like that, but I'll need to win the lottery first.

A Laser 4000 will require a licensed electrician to install if it will be inspected for code.

My wash has presoak split off to presoak and "Bug Off" functions. Very few use the presoak. My foam brushes get worn out in about six months. IMO most presoaks are too expensive to use as a bay soap. They either don't clean well or don't produce enough show at a dilution that's...